[Asterisk-Users] ISDN PRI "calling number" for outgoing calls

[denz-infotechs]

hi!


I have a question of ISDN PRI "calling number" setting for outgoing call. I
need the receiver to see the CLI that I have set. Eventough I've set the CLI
as below, the receiver keep on getting a fixed number( used with the PRI to
receive incoming calls).  My ISDN PRI E1 provider says he has not done any
restricions on the custom CLI side.

----------------------------------------------------------------------------
-------
/var/spool/asterisk/outgoing/1.call
Channel: zap/g1/722442946
Callerid: Test <722424327>
MaxRetries: 1
RetryTime: 60
WaitTime: 30
Context: meet
Extension: 722442946
SetVar: CALLERIDNUM=722444444
SetVar: SECONDPARTY=722424327
SetVar: FIRSTPARTY=722442946
Priority: 1
----------------------------------------------------------------------------
-----------------------

The CLI that I need the receiver to see is the = Callerid: Test <722424327>
I've attached the debug messages of ISDN Q.931 (PRI debug span 1). What
could we make out of these debug messages. Is it been properly set and
passed to the ISDN system by *, judging by the above messages ????  Or the
ISDN admin is new to the job :) ??????

--------------------------------------------CALL
DEBUG-----------------------------------------


-- Attempting call on zap/g1/722442946 for 722442946 at meet:1 (Retry 1)
-- Making new call for cr 32774
> Protocol Discriminator: Q.931 (8)  len=45
> Call Ref: len= 2 (reference 6/0x6) (Originator)
> Message type: SETUP (5)
> Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer
capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode
(16)
>                              Ext: 1  User information layer 1: A-Law (35)
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
>                        ChanSel: Reserved
>                       Ext: 1  Coding: 0   Number Specified   Channel Type:
3
>                       Ext: 1  Channel: 1 ]
> Display (len= 5) [ > Display (len= 5) [ 1> Display (len= 5) [ 1T> Display
(len= 5) [ 1Te> Display (len= 5) [ 1Tes> Display (len= 5) [ 1Test> Display
(len= 5) [ 1Test ]
> Calling Number (len=10) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
Unknown Number Plan (0)
>                           Presentation: Presentation permitted, user
number passed network screening (1) '722424327' ]
> Called Number (len=12) [ Ext: 1  TON: Unknown Number Type (0)  NPI:
Unknown Number Plan (0) '722442946' ]
> Sending Complete (len= 0)
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
< Message type: CALL PROCEEDING (2)
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0   Number Specified   Channel Type:
3
<                       Ext: 1  Channel: 1 ]
-- Processing IE 24 (Channel Identification)
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
< Message type: ALERTING (1)
< Protocol Discriminator: Q.931 (8)  len=13
< Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
< Message type: DISCONNECT (69)
< Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location:
Public network serving the remote user (4)
<                  Ext: 1  Cause: User busy (17), class = Normal Event (1) ]
< Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0:
0   Location: Public network serving the local user (2)
<                               Ext: 1  Progress Description: Inband
information or appropriate pattern now available. (8) ]


Can someone suggest ?


bit123.