[Asterisk-Users] OH323 and G729

[Serge]

Yes, it's work,
Thanks,
But possible don't use Global Var?, due in this situation all other
destinations use this codec, after 1 time global setup. And g729 - limited:(

Regards,
Serge.

----- Original Message ----- 
From: "Michael Manousos" <manousos at inaccessnetworks.com>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, July 13, 2004 1:46 PM
Subject: Re: [Asterisk-Users] OH323 and G729


>
> Try with 'SetGlobalVar' instead of 'SetVar'.
>
> Michael.
>
> Serge wrote:
> > Dear All,
> >
> > I have problem with new oh323 0.6.3a , I try use var OH323_OUTCODEC, but
> > it don't work.
> > oh323 driver don't want connect to gateway with g729, it's work if I
> > only use in oh323.conf one codec ( g729 ). If I enable 2 or more codecs
> > - always in use other codec:
> >
> >  -- Executing SetVar("IAX2[4010 at 4010]/1", "OH323_OUTCODEC=g729a") in new
> > stack
> >     -- Executing Dial("IAX2[4010 at 4010]/1", "OH323/##########|70") in new
> > stack
> >     -- H.323 call to ######### with codec GSM
> >
> > Due Gateway don't support GSM and ulaw, always return: "No one is
> > available to answer at this time"
> >
> > Many thanks for your help,
> > Regards,
> > Serge.
> >
> >
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users