[Asterisk-Users] IAX2 calls through IAXTEL.com

[Mike Benoit]

I've been getting the same issue with toll free numbers over IAXTEL for
the last 4-5 days. I contacted Digium support (IAXTEL's website says to)
on July 9th, and all I got back was "We will look in to it".

I haven't heard anything since. 



On Tue, 2004-07-13 at 08:38 -0400, Steve Woolley wrote:
> I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls
> through. IAXTEL.com gave me a number (example) of 700-555-6226. I have
> made the following changes to my:
> 
> /etc/asterisk/extensions.conf:
> 	[iaxtel700]
> 	exten =>
> _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword at iaxtel.com/${EXTEN:1})
> 	exten =>
> _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword at iaxtel.com/${EXTEN:1})
> 
> /etc/asterisk/iax.conf:
> 	[general]
> 	port=5036
> 	bandwidth=high
> 	disallow=all
> 	allow=gsm
> 	tos=0x18
> 	register => myusername:mypassword at iaxtel.com
> 
> 	[guest]
> 	type=user
> 	context=guest
> 
> 	[iaxtel]
> 	type=peer
> 	context=inbound-analog
> 	auth=rsa
> 	inkeys=iaxtel
> 
> 	[iaxtel-outbound]
> 	type=peer
> 	username=swoolley
> 	secret=gl0bal
> 	host=iaxtel.com
> 
> The good news is that dialing 700-XXX-XXXX numbers (at Digium) works
> great. 
> 
> I however have two problems:
> 
> 1) if I dial 800 numbers, like (800)555-1212, I get a bunch of silence
> and the following in my log:
>     -- Starting simple switch on 'Zap/97-1'
>     -- Executing NoOp("Zap/97-1", "") in new stack
>     -- Executing Goto("Zap/97-1", "intern-post|818005551212|1") in new
> stack
>     -- Goto (intern-post,817005556226,1)
>     -- Executing Dial("Zap/97-1",
> "IAX2/myusername:mypassword at iaxtel.com/18005551212 at iaxtel") in new stack
>     -- Called myusername:mypassword at iaxtel.com/18005551212 at iaxtel
>     -- Call accepted by 69.73.19.178 (format GSM)
>     -- Format for call is GSM
>     -- IAX2[iaxtel-outbound]/3 stopped sounds
> 
>    The call never seems to go through.
> 
> 2) Not knowing any other way to test, I have simply picked up my
> asterisk SIP and analog phones and dialed my own 700 number
> (700)555-6226 to which I get a bunch of silence and the following in my
> log:
> 
> 
>     -- Executing NoOp("Zap/97-1", "") in new stack
>     -- Executing Goto("Zap/97-1", "intern-post|817005556226|1") in new
> stack
>     -- Goto (intern-post,817005556226,1)
>     -- Executing Dial("Zap/97-1",
> "IAX2/myusername:mypassword at iaxtel.com/17005556226 at iaxtel") in new stack
>     -- Called myusername:mypassword at iaxtel.com/17005556226 at iaxtel
>     -- Call accepted by 69.73.19.178 (format GSM)
>     -- Format for call is GSM
>     -- IAX2[iaxtel-outbound]/2 stopped sounds
>     -- Hungup 'IAX2[iaxtel-outbound]/2'
> 
>    But I do get a:
>     -- Registered to '69.73.19.178', who sees us as 63.143.35.201:4569
> 
>    When asterisk is starting up so I belive I am registered.
>    Can I simply not dial my own 700 number from the same asterisk PBX as
> a test or do I have some real problem?
> 
> 
> 
> --
> Steve Woolley
> IT Manager
> ADS Telecom, Inc.
> 59 Skyline Drive
> Suite 1250
> Lake Mary, Florida 32746
> 
> Phone: (407)682-6226 x1110
> Fax:   (407)682-3455
> Cell:  (321)229-5311
> 
> swoolley at adstelecom.com
> www.adstelecom.com 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Mike Benoit <ipso at snappymail.ca>