[Asterisk-Users] bristuff - hfc card + x100p

Tomaz izol at itt.nu
Fri Jul 9 03:47:19 MST 2004


hi,

i have two hfc isdn cards and one x100p
modules are loaded in order:
-----------------
insmod zaptel
insmod zaphfc modes=0
insmod wcfxo
ztcfg
--------------------

 
cat /etc/zaptel.conf
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
#
loadzone=nl
defaultzone=nl
span=2,1,3,ccs,ami
bchan=4-5
dchan=6
#
loadzone=nl
defaultzone=nl
fxsks=7



---------------------------
and in zapata.conf i have:

[channels]
switchtype = euroisdn
signalling = bri_cpe
prilocaldialplan=national
pridialplan = unknown
echocancel=yes
echocancelwhenbridged=yes
;echotrainig=yes
overlapdial=no
immediate=no
group = 3
context=isdn
channel => 1-2
;
switchtype = euroisdn
signalling = bri_cpe
prilocaldialplan=national
pridialplan = unknown
echocancel=yes
echocancelwhenbridged=yes
;echotrainig=yes
overlapdial=no
immediate=no
group = 3
context=isdn
channel => 4-5
;
signalling=fxs_ks
channel=7
------------------------------------


so after that i load asterisk -vvvvvc
and get no errors at all:

[chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
    -- Registered channel 1, PRI Signalling signalling
    -- Registered channel 2, PRI Signalling signalling
    -- Registered channel 4, PRI Signalling signalling
    -- Registered channel 5, PRI Signalling signalling
    -- Registered channel 7, FXS Kewlstart signalling
  == Starting D-Channel on span 1
  == Starting D-Channel on span 2
  == Registered channel type 'Zap' (Zapata Telephony Driver w/PRI)
  == Registered channel type 'Tor' (Zapata Telephony Driver w/PRI)

isdn is working ok but with channel 7 (x100p) is something wrong .. but 
what?


 Executing Dial("SIP/1-85f5", "Zap/7/BYEXTENSION|130|t|r|f") in new stack
Jul  9 14:43:32 NOTICE[311316]: app_dial.c:559 dial_exec: Unable to 
create channel of type 'Zap'
  == Everyone is busy at this time


thankyou!
Tomaz





Robinson Tim-W10277 wrote:

>Yes, me. What problems are you having?
>
>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Tomaz
>Sent: 09 July 2004 09:07
>To: asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] bristuff - hfc card + x100p
>
>
>hi!
>
>Anyone on list has working asterisk box with hfc based card (bristuff)  
>and a x100p adapter?
>Becouse together in box I can't get it working in any way ..
>
>thank you,
>Tomaz
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>




More information about the asterisk-users mailing list