[Asterisk-Users] Two outbound calls at once

[David Goldfein]

Hello,

I am having an issue with making two simultaneous outbound calls.

When I dial, both phones try to take the same channel and it causes an
error.  Anyone have any suggestions.  My set up is as follows:

CO - PRI - ASTERISK - VODAVI(pbx).

 

Thanks,

Dave

 

*CLI>

    -- Starting simple switch on 'Zap/69-1'

    -- Executing Wait("Zap/69-1", ".1") in new stack

    -- Executing DISA("Zap/69-1", "no-password|local") in new stack

    -- Starting simple switch on 'Zap/68-1'

    -- Executing Wait("Zap/68-1", ".1") in new stack

    -- Executing DISA("Zap/68-1", "no-password|local") in new stack

Jul  8 20:44:20 WARNING[-1394406480]: cdr.c:286 ast_cdr_init: CDR already
initialized on 'Zap/69-1'

    -- Executing Dial("Zap/69-1", "Zap/g2/6022831234") in new stack

    -- Called g2/6022831234

Jul  8 20:44:20 WARNING[-1416709200]: cdr.c:286 ast_cdr_init: CDR already
initialized on 'Zap/68-1'

    -- Executing Dial("Zap/68-1", "Zap/g2/6022831234") in new stack

    -- Called g2/6022831234

    -- Channel 0/2, span 2 got hangup

    -- Forcing restart of channel 0/2 on span 2 since channel reported in
use

    -- Hungup 'Zap/26-1'

  == No one is available to answer at this time

    -- Executing Congestion("Zap/68-1", "") in new stack

    -- Channel 0/1, span 2 got hangup

    -- B-channel 0/2 successfully restarted on span 2

    -- Hungup 'Zap/25-1'

  == No one is available to answer at this time

    -- Executing Congestion("Zap/69-1", "") in new stack

  == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/69-1'

    -- Hungup 'Zap/69-1'

  == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/68-1'

    -- Hungup 'Zap/68-1'

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040708/f4708be5/attachment.htm