[Asterisk-Users] E100P

[Caleb Kow]

wct1xxp is meant for E100P, you will need to do a modprobe or ztcfg
for wct1xxp instead of wce1xxp (which is for the T100P if I am not
wrong).

Hope this helps

On Thu, 8 Jul 2004 13:57:41 +0800, Caleb Kow <calebee at gmail.com> wrote:
> wct1xxp is meant for E100P, you will need to do a modprobe or ztcfg
> for wct1xxp instead of wce1xxp (which is for the T100P if I am not
> wrong).
> 
> Hope this helps
> 
> 
> 
> On Wed, 07 Jul 2004 17:45:48 -0700, Ing. Angel Gomez <angom at telnor.net> wrote:
> > Hi, i just received an E100P, this is the first one I have ever seen,
> > and notice that the board reads T100P. Is this right ? The antistatic
> > bag had a small label that has E100P written on it, and the card is a
> > bit different than the T100P I already have, Does Digium use the same
> > boards for both cards ? I don't have an E1 link here, can I test the
> > card just by loading the driver and run zttool to see how many channels
> > it shows ? I don't find a wce1xxp driver only wct1xxp...
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>