[Asterisk-Users] T1 configuration, getting help via IRC?

[Jason Williams]

On Tue, 6 Jul 2004 11:58:58 -0500, Paul Concepcion <cepcion at gmail.com> wrote:
> > Loopback should always make your status LEDs glow steady green.  If that's not
> > working then you've got other problems.
> >
> 
> It seems I may have those "other problems" you talked about. I made a
> loopback cable and tested it on the channel bank. After about three
> seconds all the status lights went green. I plugged it into the T100P
> with varying effects. I was grasping a little, and tried different
> first lines of the /etc/zaptel.conf file:
> span=1,0,0,esf,b8zs OR
> span=1,1,0,esf,b8zs
> 
> cycles between:
>  RED- YEL/RED - YEL/REC - Red/REC - OK. Eventually settles into RED.

Looks like you have a card problem a loop back to yhe T100P should go
green in about 3 seconds like the channel bank.


Regards


Jason