[Asterisk-Users] Re: [Asterisk-Users] Re: [Asterisk-Users] Asterisk answering only one (dialed-) Number on a PTMP (German "Mehrgeräteanschluss")?

[Michael Welter]

Tim Robinson wrote:

> Hi Marco
> Asterisk will do exactly what you want, as long as your line is point to 
> multipoint.  I did my initial experimentation with Asterisk exactly as 
> you describe.  You just need to specifiy in your extensions.conf which 
> MSN numbers you want asterisk to respond to.  It will ignore all others.
> 
> Best and cheapest option would be to try a zaphfc card for 20 euros or 
> so.(Billion, Asustek, etc)  Make sure it is on its own IRQ or you will 
> have real problems.  Use bri-stuff-0.0.2 from www.junghanns.net.
> 
> When you have played a bit, you can use a second card in NT mode to 
> connect to your other ISDN equipment, and you can use * as the main 
> switch.  Magic!
> 
> And by the  way, your English is much better than my German!
> 
> Good luck!
> 
> Rgds
> Tim
> 
> wendys wrote:
> 
>> Hi,
>>  
>> please excuse my poor englisch.
>> Is it possible to connect a (privat Test-Asterisk) to my privat ISDN 
>> and allow him to only answer one dialed number?
>> We have 3 up to 10 Numbers on each (Euro-)ISDN (2 b-chanels), it 
>> cant't be done by the last Digits cause the numbers are completely 
>> different.
>> For Example:
>> I have 3 Numbers (641717, 928752....)
>> Is it possible to tell Asterisk (in Extensions.conf?) to Answer 641717 
>> an ignore incomming calls on 928752?
>> I need this solution to work with Asterisk without disconnecting my 
>> Girlfriend from the rest of the world.
>> ;-)
>>  
>> I realy tried to find an answer in your archive, Asterisk-Manual, 
>> "hitchhiker guide to Asterisk" and in Google but I'm affraid that I 
>> didn't know the right "searchstring".
>>  
>> Marco W.
>>  
>>   
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 

The zaphfc module only allows for "ccs" and "ami" in the span config. 
Is zaphfc for Europe only?

I forced "esf" and "b8zs" into the span config and the line won't sync. 
  Is anyone in the states using zaphfc?

Mike