[Asterisk-Users] strange problem with oh323 loaded!

[T. Chan]

Dear All,

I don't know but I tried all 0.6.x version of OH323 and normally I use
safe_asterisk to start asterisk, and everytime when I use 'stop now' to
terminate asterisk, it does not do anything, and you are rite, I have to use
kill -9 to kill the PIDs and threads. However, if I use asterisk -vvvgc to
start, 'stop now' works.

Thanks all

TC

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Scott Stingel
Sent: Friday, July 02, 2004 4:37 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] strange problem with oh323 loaded!


Same problem here - with latest 0.6.3a oh323.  Locks up on exit.  Had to
kill -9

This didn't happen with 0.6.2a, but that's on a different machine.  Maybe
you could try this older version which worked fine (same PwLib and OpenH323)

Regards
Scott


Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Anthony Law
Sent: Friday, July 02, 2004 1:15 PM
To: Mailing List Asterisk
Subject: [Asterisk-Users] strange problem with oh323 loaded!

Hi,

Here it is when I start it with /etc/rc.d/init.d/asteriskd found in asterisk
source contrib/init.d/rc.redhat.asterisk It started without problem and when
i issue "stop now" It freezes, please see below,

------------------------
tai*CLI>
add         debug       dont        dump        extensions  help        iax2
include     init
load        local       logger      mgcp        no          oh323
reload      remove      save
set         show        sip         skinny      soft        unload
  == Registered channel type 'OH323' (OpenH323 Channel Driver)
  == OpenH323 Channel Ready (v0.6.3)
  == Parsing '/etc/asterisk/enum.conf':   == Parsing
'/etc/asterisk/enum.conf': Found
  == Parsing '/etc/asterisk/logger.conf':   == Parsing
'/etc/asterisk/logger.conf': Found
Asterisk Event Logger restarted
Asterisk Ready.

tai*CLI> stop now
tai*CLI>

It freezes right here and does nothing else

---------------------------------
If I do it with safe_asterisk , it died and loops

root at tai init.d]# /usr/sbin/safe_asterisk -vvvvvvc [root at tai init.d]#
Asterisk ended with exit status 127 Asterisk died with code 127.
Automatically restarting Asterisk.
Asterisk ended with exit status 127
Asterisk died with code 127.
Automatically restarting Asterisk.
Asterisk ended with exit status 127

------------------------------------------------

As I have mentioned, if I noload oh323 this won't happen

*CLI> stop now
Beginning asterisk shutdown....
Executing last minute cleanups
  == Destroying any remaining musiconhold processes Asterisk cleanly ending
(0).

Any ideas?


Regards,



Anthony

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.713 / Virus Database: 469 - Release Date: 6/30/2004

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.713 / Virus Database: 469 - Release Date: 6/30/2004