[Asterisk-Users] Channel Bank Newbie Problem

[David Morillo]

Hi all
        	I'm trying to configure a TE410P in Europe with three
E1s and a T1 channel bank (already bought in the US) to receive and make
calls through *. I managed to get the E1s to work, but I'm having
trouble with the channel bank (a Rhino). I have tried the bank in spans
1 and 4 changing jumpers in the card (always with no PRI connected, as I
have no PRI where I'm testing now, so I'm trying to make the bank work
"alone"). I've tried AutoT1 and also configuring it myself, as ESF and
D4, with B8ZS and AMI, changing ZAPTEL and ZAPATA. When I plug the
channel bank, it goes ok, framing and signalling lighting green, but
after a few seconds, signalling starts blinking, alarm lights red, with
display saying "Loss of carrier - (LOS - no T1), Asterisk and zttool
detecting yellow alarm. 
        The upper right corner of the displays says WINK ESF.
        Any ideas?
        Thanks in advance!
        
        ZAPTEL.CONF:
        span=1,1,0,ccs,hdb3,yellow 
        span=2,2,0,ccs,hdb3,yellow #2,2,0
        span=3,3,0,ccs,hdb3,yellow #3,3,0
        span=4,0,0,esf,b8zs
        bchan=1-15,17-31
        bchan=32-46,48-62
        bchan=63-77,79-93
        dchan=16,47,78
        fxoks=94-117
        loadzone=us #es
        defaultzone=us #es
        
        ZAPATA.CONF
        [channels]
        switchtype=euroisdn
        ;pridialplan=unknown
        signalling=pri_cpe
        context=default
        group=1
        channel => 1-15,17-31
        channel => 32-46,48-62
        channel => 63-77,79-93
        
        signalling=fxo_ks
        context=Internas
        group=2
        channel=>94-117
        
        I have also tried things like:
 
;language=es;context=default;switchtype=euroisdn;rxwink=300;usecallerid=
yes;hidecallerid=no;callwaiting=yes;usecallingpres=yes;callwaitingcaller
id=yes;threewaycalling=yes;transfer=yes;cancallforward=yes;callreturn=ye
s;echocancel=no;echocancelwhenbridged=yes;rxgain=0.0;txgain=0.0
        
        ZTTOOL says:
        Zaptel Configuration
        ======================
        SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
        SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
        SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
        SPAN 4: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
        
        Channel map:
        
        Channel 01: Individual Clear channel (Default) (Slaves: 01)
        ...
        Channel 15: Individual Clear channel (Default) (Slaves: 15)
        Channel 16: D-channel (Default) (Slaves: 16)
        Channel 17: Individual Clear channel (Default) (Slaves: 17)
        ...
        Channel 92: Individual Clear channel (Default) (Slaves: 92)
        Channel 93: Individual Clear channel (Default) (Slaves: 93)
        Channel 94: FXO Kewlstart (Default) (Slaves: 94)
        Channel 95: FXO Kewlstart (Default) (Slaves: 95)
        ...
        Channel 116: FXO Kewlstart (Default) (Slaves: 116)
        Channel 117: FXO Kewlstart (Default) (Slaves: 117)
        117 channels configured.
        TE410P: Span 1 configures for CCS/HDB3
        SPAN 1: Primary Sync Source
        TE410P: Span 2 configures for CCS/HDB3
        TE410P: Span 3 configures for CCS/HDB3
        TE410P: Span 4 configures for ESF/B8ZS