[Asterisk-Users] Adtran 750 DID question.

[Bisker, Scott (7805)]

Yes.  Adtran FXS cards.




Did you say you were using Adtran FXS cards?

Bisker, Scott (7805) wrote:

> Hello All,
> 
> I've mostly solved my DID problem from a few days ago.  Apparenly the lines weren't configured properly.  Now heres the next question.  12 E&M wink lines from telco.  I have them all plugging into an Adtran 750 with FXS cards.  The Adtran ports are configured DPO.   How do I signal this from Zaptel.  I have them setup E&M in zaptel.conf and EM_W in zapata.conf.  They work, however, no DNIS info is being passed.  Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed?  I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran.  It looks like asterisk isn't winking properly.
> 
> When I had the lines misconfigured for fxs_ls the DNIS info was passing fine.
> 
> I'm running 
> zaptel-0.8.0
> libpri-0.5.1
> And asterisk CVS from 12/23/2003
> RedHat 8.0
> Dual 2.4 Xeon Processors (hyperthreading disabled)
> 2Gig Memory
> 
> Any help would be greatly appreciated.
> 
> Regards,
> 
> -sb
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users