[Asterisk-Users] Adtran 750 DID question.

[Bisker, Scott (7805)]

I tried both featd and em in zapata.conf, to no avail.  I restarted in between all changes.  Is it possible to signal the DPO ports on the 750 with fxo_ls or fxo_ks?

This is the last piece to my DID puzzle.  Anyone else with experience on this oddball config?

Thanks,

-sb

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of James Sharp
Sent: Friday, January 30, 2004 11:52 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Adtran 750 DID question.


> Hello All,
>
> I've mostly solved my DID problem from a few days ago.  Apparenly the
> lines weren't configured properly.  Now heres the next question.  12 E&M
> wink lines from telco.  I have them all plugging into an Adtran 750 with
> FXS cards.  The Adtran ports are configured DPO.   How do I signal this
> from Zaptel.  I have them setup E&M in zaptel.conf and EM_W in
> zapata.conf.  They work, however, no DNIS info is being passed.  Do I need
> to signal these something different like loopstart or kewlstart, so the
> DNIS info gets passed?  I watch the Tx/Rx bits from zttool, and everything
> looks okay coming from the Adtran.  It looks like asterisk isn't winking
> properly.

I had a similar problem.  I ended up setting the trunks to either just
plain em or featd (I don't remember).  I chased through the chan_zap
source code and decided (maybe incorrectly) that asterisk doesn't look for
DNIS digits in E&M Wink mode.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users