[Asterisk-Users] Adtran 750 DID question.

[Bisker, Scott (7805)]

Hello All,

I've mostly solved my DID problem from a few days ago.  Apparenly the lines weren't configured properly.  Now heres the next question.  12 E&M wink lines from telco.  I have them all plugging into an Adtran 750 with FXS cards.  The Adtran ports are configured DPO.   How do I signal this from Zaptel.  I have them setup E&M in zaptel.conf and EM_W in zapata.conf.  They work, however, no DNIS info is being passed.  Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed?  I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran.  It looks like asterisk isn't winking properly.

When I had the lines misconfigured for fxs_ls the DNIS info was passing fine.

I'm running 
zaptel-0.8.0
libpri-0.5.1
And asterisk CVS from 12/23/2003
RedHat 8.0
Dual 2.4 Xeon Processors (hyperthreading disabled)
2Gig Memory

Any help would be greatly appreciated.

Regards,

-sb