[Asterisk-Users] ETSI PRI ISDN Signalling

[Daniel Bichara]

Samuel Jimenez wrote:

>  Hi,
>
>  Assuming that the problem *is not* soft settings I would recommend you to
>verify that the channel mapping is the same in your adapter as in your
>E100P.   Some times they do not match, and the D channel  does not arrive
>where expected at each end.
>  
>
Hi Sam,

My problem was a cross-cable. Now it is ok. Thanks

Daniel

>  As you said, just a clue.
>
>  Rgds
>
>  Sam\\\
>
>
>
>
>  ----- Original Message ----- 
>  From: "Daniel Bichara" <daniel at bichara.com.br>
>  To: <asterisk-users at lists.digium.com>
>  Sent: Thursday, January 22, 2004 1:38 PM
>  Subject: [Asterisk-Users] ETSI PRI ISDN Signalling
>
>
>  > Hi All,
>  >
>  > I've bought a R2Adapter to convert R2Digital to ISDN. I am trying to
>  > config E100P card but D-Channel is down. I know R2Adapter uses ETSI ISDN
>  > Protocol so I tried unsucessfully setup switchtype to EuroISDN. Any
>clue?
>  >
>  > Daniel
>  >
>  >
>  > _______________________________________________
>  > Asterisk-Users mailing list
>  > Asterisk-Users at lists.digium.com
>  > http://lists.digium.com/mailman/listinfo/asterisk-users
>  > To UNSUBSCRIBE or update options visit:
>  >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>