[Asterisk-Users] Data calls (ISDN/64k) through * PRI
CW_ASN - Gus
cw_asn at fibertel.com.ar
Thu Jan 22 16:21:01 MST 2004
You're still receiving [Incompatible destination], this cause is used when
bearer capabilities aren't equal.
----- Original Message -----
From: "Thomas Haeger" <asterisk-mailing at beronet.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, January 22, 2004 3:07 PM
Subject: AW: [Asterisk-Users] Data calls (ISDN/64k) through * PRI
> Hi,
>
> we tried following scenario:
>
>
> DTAG (S0) at our office Datacall with AVMFritz (PSTN) ---> Colo
> TelesSwitch --> CoLo Asterisk (---> PSTN)
>
> I think, no i know that the Teles Switch can route 64k data calls
> here is the Teles Trace:
>
> #000008 SETUP-->|
> 15:29:40,378 02 01 78 AE |
> 08 02 03 90 05 |
> Bearer Caps 04 02 88 90 |
> Channel Id 18 03 A1 83 9B |
> Calling PN 6C 0C 21 83 33 33 32 38 |
> 33 33 34 37 37 38 |
> Called PN 70 09 C1 36 33 34 39 34 |
> 34 34 31 |
> |<--RR
> #000008
> | 15:29:40,388 02 01 01 7A
> |<--SETUP ACKNOWLEDGE
> #000008
> | 15:29:40,398 00 01 AE 7A
> | 08 02 83 90 0D
> | Channel Id 18 03 A9 83 9B
> |<--SETUP
> #000012
> | 15:29:40,408 00 01 2A D4
> | 08 02 16 60 05
> | Bearer Caps 04 02 88 90
> | Channel Id 18 03 A1 83 88
> | Calling PN 6C 0C 21 80 33 33
32
> 38
> | 33 33 34 37 37 38
> | Called PN 70 09 81 36 33 34
39
> 34
> | 34 34 31
> #000008 RR-->|
> 15:29:40,408 00 01 01 B0 |
> #000012 RR-->|
> 15:29:40,418 00 01 01 2C |
> #000012 SETUP ACKNOWLEDGE-->|
> 15:29:40,418 02 01 D4 2C |
> 08 02 96 60 0D |
> Channel Id 18 03 A9 83 88 |
> Progress Ind 1E 02 81 82 |
> |<--RR
> #000012
> | 15:29:40,418 02 01 01 D6
> #000012 SETUP-->|
> 15:29:40,428 02 01 D6 2C |
> 08 02 1A 21 05 |
> Bearer Caps 04 03 88 90 A3 |
> Channel Id 18 03 A1 83 81 |
> Calling PN 6C 0C 41 81 33 33 32 38 |
> 33 33 34 37 37 38 |
> Called PN 70 0D C1 30 33 33 32 38 |
> 33 30 37 37 37 33 33 |
> |<--RELEASE COMPLETE
> #000012
> | 15:29:40,428 00 01 2C D8
> | 08 02 9A 21 5A
> | 08 02 80 D8
> | [Incompatible
> destinat
> | ion]
> #000012 RR-->|
>
> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von CW_ASN -
> Gus
> Gesendet: Donnerstag, 22. Januar 2004 17:24
> An: asterisk-users at lists.digium.com
> Betreff: Re: [Asterisk-Users] Data calls (ISDN/64k) through * PRI
>
>
> The incoming call request Unrestricted and 64K, and this looks like ok,
but
> in the SETUP_ACK the called number parameters shows: "Ext: 1 Progress
> Description: Called equipment is non-ISDN. (2) ]", like as is not an ISDN
> equipment.
> In the most of cases, Information transfer rate = to '64 kbit/s', and Info
> transfer capability = 'real bw required'.
>
> Are you sure that the equipment attached to * can be used in 64K?
>
> Regards,
>
> Gus
>
> ----- Original Message -----
> From: "Thomas Haeger" <asterisk-mailing at beronet.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Thursday, January 22, 2004 12:28 PM
> Subject: AW: [Asterisk-Users] Data calls (ISDN/64k) through * PRI
>
>
> > Hi ,
> >
> > maybe someone knows what's going wrong...
> >
> > The incoming data call will not really identified as ISDN 64k/Data....
> >
> > Here my pri debug ouput
> >
> > < Protocol Discriminator: Q.931 (8) len=39
> > < Call Ref: len= 2 (reference 5635/0x1603) (Originator)
> > < Message type: SETUP (5)
> > < Bearer Capability (len= 2) [ Ext: 1 Q.931 Std: 0 Info transfer
> > capability: Unrestricted digital information (8)
> > < Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode
> > (16)
> > < Ext: 0 User information layer 1: Unknown
> > (24)
> > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred
> > Dchan: 0
> > < ChanSel: Reserved
> > < Ext: 1 Coding: 0 Number Specified Channel
> Type:
> > 3
> > < Ext: 1 Channel: 30 ]
> > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > < Presentation: Presentation permitted, user
> > number not screened (0) '3328334778' ]
> > < Called Number (len=11) [ Ext: 1 TON: Unknown Number Type (0) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '63494441' ]
> > -- Making new call for cr 5635
> > -- Processing Q.931 Call Setup
> > -- Processing IE 4 (Bearer Capability)
> > -- Processing IE 24 (Channel Identification)
> > -- Processing IE 108 (Calling Party Number)
> > -- Processing IE 112 (Called Party Number)
> > > Protocol Discriminator: Q.931 (8) len=14
> > > Call Ref: len= 2 (reference 38403/0x9603) (Terminator)
> > > Message type: SETUP ACKNOWLEDGE (13)
> > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> > Dchan: 0
> > > ChanSel: Reserved
> > > Ext: 1 Coding: 0 Number Specified Channel
> Type:
> > 3
> > > Ext: 1 Channel: 30 ]
> > > Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0)
> 0:
> > 0 Location: Private network serving the local user (1)
> > > Ext: 1 Progress Description: Called
> > equipment is non-ISDN. (2) ]
> > -- Accepting call from '3328334778' to '63494441' on channel 30,
span
> 2
> > -- Executing GotoIf("Zap/61-1", "0?50:100") in new stack
> > -- Goto (pri2,63494441,100)
> > -- Executing Dial("Zap/61-1", "Zap/g2/033283077733SPEECH") in new
> stack
> > -- Making new call for cr 39439
> > > Protocol Discriminator: Q.931 (8) len=50
> > > Call Ref: len= 2 (reference 6671/0x1A0F) (Originator)
> > > Message type: SETUP (5)
> > > Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer
> > capability: Speech (0)
> > > Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode
> > (16)
> > > Ext: 1 User information layer 1: A-Law
> (35)
> > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred
> > Dchan: 0
> > > ChanSel: Reserved
> > > Ext: 1 Coding: 0 Number Specified Channel
> Type:
> > 3
> > > Ext: 1 Channel: 1 ]
> > > Calling Number (len=14) [ Ext: 0 TON: Subscriber Number (4) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > > Presentation: Presentation permitted, user
> > number passed network screening (1) '3328334778' ]
> > > Called Number (len=21) [ Ext: 1 TON: Subscriber Number (4) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '033283077733SPEECH' ]
> > -- Called g2/033283077733SPEECH
> > < Protocol Discriminator: Q.931 (8) len=10
> > < Call Ref: len= 2 (reference 39439/0x9A0F) (Terminator)
> >
> > < Message type: SETUP ACKNOWLEDGE (13)
> > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> > Dchan: 0
> > < ChanSel: Reserved
> > < Ext: 1 Coding: 0 Number Specified Channel
> Type:
> > 3
> > < Ext: 1 Channel: 1 ]
> > -- Processing IE 24 (Channel Identification)
> > beroasterisk*CLI>
> > < Protocol Discriminator: Q.931 (8) len=9
> > < Call Ref: len= 2 (reference 5635/0x1603) (Originator)
> > < Message type: DISCONNECT (69)
> > < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location:
> > User (0)
> > < Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event
> > (1) ]
> > -- Processing IE 8 (Cause)
> > -- Channel 30, span 2 got hangup
> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Overlap sending,
peerstate
> > Overlap Receiving
> > > Protocol Discriminator: Q.931 (8) len=9
> > > Call Ref: len= 2 (reference 6671/0x1A0F) (Originator)
> > > Message type: DISCONNECT (69)
> > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location:
> > Private network serving the local user (1)
> > > Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event
> > (1) ]
> > -- Hungup 'Zap/32-1'
> > == Spawn extension (pri2, 63494441, 100) exited non-zero on 'Zap/61-1'
> > < Protocol Discriminator: Q.931 (8) len=9
> > < Call Ref: len= 2 (reference 39439/0x9A0F) (Terminator)
> > < Message type: RELEASE (77)
> > < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location:
> > User (0)
> > < Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event
> > (1) ]
> > -- Processing IE 8 (Cause)
> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release
> > Request
> > > Protocol Discriminator: Q.931 (8) len=9
> > > Call Ref: len= 2 (reference 6671/0x1A0F) (Originator)
> > > Message type: RELEASE COMPLETE (90)
> > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location:
> > Private network serving the local user (1)
> > > Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event
> > (1) ]
> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> > peerstate Disconnect Request
> > > Protocol Discriminator: Q.931 (8) len=9
> > > Call Ref: len= 2 (reference 38403/0x9603) (Terminator)
> > > Message type: RELEASE (77)
> > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location:
> > Private network serving the local user (1)
> > > Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event
> > (1) ]
> > -- Hungup 'Zap/61-1'
> > < Protocol Discriminator: Q.931 (8) len=5
> > < Call Ref: len= 2 (reference 5635/0x1603) (Originator)
> > < Message type: RELEASE COMPLETE (90)
> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> > beroasterisk*CLI>
> >
> >
> >
> >
> >
> >
> > -----Ursprungliche Nachricht-----
> > Von: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Maik
> > Schmitt
> > Gesendet: Donnerstag, 22. Januar 2004 15:32
> > An: asterisk-users at lists.digium.com
> > Betreff: Re: [Asterisk-Users] Data calls (ISDN/64k) through * PRI
> >
> >
> > > is there any special version from libpri or asterisk necessary since
it
> > > works ?
> > >
> > > I'am runnig version: CVS-11/11/03-11:49:55.... and it don't work :-(
> >
> > We have CVS-11/24/03-12:12:10
> >
> > --
> > Maik Schmitt http://graphics.cs.uni-sb.de/VoIP
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list