[Asterisk-Users] G.729 Licenses from Digium

[Senad Jordanovic]

zoa wrote:
> sure,
> 
> Its not impossible to have g729 and scsi only systems, although
> several 
> people with scsi systems have had issues with the g729 installation,
> i did not. 
> 
> That doesnt mean that g729 is rock stable, every now and then the
> license 
> disappears or stops working for some hours/restarts.
> 
> If you have a choice, i'd go for ilbc, sound quality is better,
> packetloss 
> features are great....
> 
> 
> At 22:28 21/01/2004 +0000, you wrote:
>> zoa wrote:
>>> This is absolutely not true.
>>> 
>>> I have 3 (raid) scsi asterisk machines in production.
>>> 
>>> Joachim.
>>> 
>>> At 11:32 21/01/2004 -0500, you wrote:
>>>> In my view at least one IDE drive must be installed in order for *
>>>> g729 license to work. 
>>>> 
>>>> To simplyfy, here is the matrix (This is how I think it is please
>>>> confirm) 
>>>> 
>>>> IDE Disk Install - g729 coder work.
>>>> IDE/SCCI interfaces. Only a SCSI disk installed - g729 will not
>>>> work. IDE/SCSI Interfaces. At lease one IDE disk installed - g729
>>>> will work. 
>>>> 
>>>> SATA Serial ATA Disk I have no clue how it works. Is SATA
>>>> considered a IDE disk or a SCSI disk ?
>>>> 
>>>> This is an issue that VoiceAge need to address soon.
>>>> 
>>>> - SamW
>>>> 
>>>> -----Original Message-----
>>>> From: Amaury Jacquot [mailto:sxpert at esitcom.org]
>>>> Sent: Wednesday, January 21, 2004 4:32 AM
>>>> To: asterisk-users at lists.digium.com
>>>> Subject: Re: [Asterisk-Users] G.729 Licenses from Digium
>>>> 
>>>> Terence Parker wrote:
>>>>> OK - but what counts as a SCSI system?
>>>>> 
>>>>> These days there are lots of pseudo-SCSI systems around - such as
>>>>> our
>>>> server
>>>>> which runs a serial-ATA RAID but the driver is loaded as a SCSI
>>>>> device. 
>>>>> 
>>>>> Is that still IDE? Or SCSI?
>>>> 
>>>> technically, it uses the SCSI command set over a serial link, so,
>>>> it's SCSI 
>>>> 
>>>>> Terence
>>>>> 
>>>>> 
>>>>> 
>>>>>> I know one thing for sure...
>>>>>> G729 WILL NOT WORK after installation *(it never realy installs
>>>>>> but does the segmentation faults), * will not start, and you will
>>>>>> need to prevent g729 module from Starting in order for * to
>>>>>> start. So do not buy if your box is SCSI in any part. Ta
>>>>>> SJ
>>>>> 
>>>>> _______________________________________________
>>>>> Asterisk-Users mailing list Asterisk-Users at lists.digium.com
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Asterisk-Users mailing list Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>> 
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users To
>>>    UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> 
>> Can you please clarify which part are you referring as not being
>> true? 
>> 
>> 
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users To
>    UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users 

Ok, fair enough.

My servers do not have IDE at all (not even CDROM), hence why
My g729 installations failed.

Ta
SJ