[Asterisk-Users] Static Noise coming from Wildcard FXS: Wildcard TDM400P

JR Richardson jr.richardson at cox.net
Wed Jan 14 20:48:40 MST 2004


I had the same problem, I reseated the daughter card on the board and that
helped but just for a short time.  Eventually the port wouldn't even break
dial-tone. All other ports 2, 3&4 on the card were fine, it was only port 1
giving a problem.  I swapped daughter boards around between ports but the
problem stayed with port 1.  Maybe this is a sign of a bad run of TDM boards
with some component associated with port one.  I'm in the process of RMA
with Digium for a new card.


What port is the problem you are experiencing?

JR

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
nanog at cfsdigital.com
Sent: Wednesday, January 14, 2004 6:04 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Static Noise coming from Wildcard FXS: Wildcard
TDM400P

I recently plugged in Phone to my TDM400P Card to test out something I
mostly use sip phones to interface with *. All of sudden I'm getting lot of
line static noise coming of the card is there any settings I should look at
or anything I need to do on the command line at this point I'm open to any
ideas
I'm running
0.7.1 on Redhat 9.0 machine.

Any insight would be greatly appreciated.

-Frankie Gravato
[aolim]:cronparser
[irc]:crontibs

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list