[Asterisk-Users] Scaleable Solution for small office

[calvis]

I have an opportunity to purchase a used ADIT 600 Channel Bank with 3 FXS
Cards.  What would be a fair price for this equipment?

Charles


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of TC
Sent: Tuesday, January 06, 2004 4:12 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Scaleable Solution for small office

>I would like to upgrade to a channel bank, and was wondering if anyone has
had any echo issues with other >digium hardware.
the t100 connected to a channel bank will not gurantee no echo,
but from experience I do have 2 solutions that removed 100% of the echo from
my installations


1) CAC ADIT 600 channel bank, 8 port FXO cards with what CAC call adaptive
impedance matching
     I had both a x100 and a t100 and an adtran ta-750 that both produce
echo connect to my local PSTN
     when i tried the ADIT 600 with 8 port FXO connect to my analog line ALL
perceived echo
     vanished, I still had the echo can settings in zaptel turned on

2) Install an Inline T1 hardware echo can between the T100 card and the
channel bank T1 interface
    I took that same adtran ta-750 that gave echo on the analog lines and
installed a TellLabs 2572 64ms
    hardware echo card, turned off all zaptel echo settings, and All
perceived echo vanished

My personal belief is that the hit and mis echo on the x100/x101 cards is
caused by the impedance mismatch
between these cards and different Telco lines, the zaptel stuff tries to fix
this echo after the
fact & the current algorithms will not converge in a sub-second time frame




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
---
[This E-mail scanned for viruses by Virus Hunter at itechgroup.com]


---
[This E-mail scanned for viruses by Virus Hunter at itechgroup.com]