[Asterisk-Users] Get new PRI working
Tim Robinson
tim at txrx.org.uk
Sun Feb 15 08:16:49 MST 2004
Adam -
I had a similar problem here in the UK using a Euro-ISDN PRI from BT.
The key was to add in the line pridialplan=unknown into zapata.conf.
Then it leapt into life in both directions. My files are below for your
information.
Rgds
Tim Robinson, Basingstoke UK
zaptel.conf
-----------
# Config for a UK Euro-ISDN line
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
loadzone=uk
defaultzone=uk
zapata.conf
-----------
; Configuration file
[channels]
usecallerid=yes
language=en
pridialplan=unknown
signalling=pri_cpe
switchtype=euroisdn
group=1
context=inboundpstn
channel => 1-15
channel => 17-31
Adam Goryachev wrote:
> Hi all,
>
> I received my shiny new TE405P on Friday, and after much fiddling and
> assistance from the irc channel, I got a OK status (telco reversed the TX/RX
> and I wired it wrong).
>
> Anyway, currently it works for inbound calls, but I can't seem to dialout on
> it. Here is the config from zaptel.conf:
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-10
> unused=11-15,17-31
> dchan=16
>
> and zapata.conf
> switchtype => euroisdn
> callgroup => 1
> group => 2
> busydetect => no
> immediate => yes
> context => remote
> signalling => pri_cpe
> ;stripmsd => 1
> callprogress => no
> channel => 1-10
>
> and here is the debug from asterisk:
> -- Executing Dial("IAX2[home at 10.0.10.2:4569]/3", "Zap/2/93454395||rT")
> in new stack
> Feb 15 15:58:27 DEBUG[20497]: app_dial.c:400 dial_exec: SIMPLE DIAL (NO URL)
> -- Making new call for cr 32774
>
>>Protocol Discriminator: Q.931 (8) len=43
>>Call Ref: len= 2 (reference 6/0x6) (Originator)
>>Message type: SETUP (5)
>>Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer
>
> capability: Speech (0)
>
>> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
>
> (16)
>
>> Ext: 1 User information layer 1: A-Law (35)
>>Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
>
> Dchan: 0
>
>> ChanSel: Reserved
>> Ext: 1 Coding: 0 Number Specified Channel Type: 3
>> Ext: 1 Channel: 2 ]
>>Display (len= 7) [ > Display (len= 7) [ 1> Display (len= 7) [ 1H> Display
>
> (len= 7) [ 1Ho> Display (len= 7) [ 1Hom> Display (len= 7) [ 1Home> Display
> (len= 7) [ 1Home > Display (len= 7) [ 1Home 2> Display (len= 7) [ 1Home 2 ]
>
>>Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI:
>
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>
>> Presentation: Presentation permitted, user
>
> number passed network screening (1) '651' ]
>
>>Called Number (len=11) [ Ext: 1 TON: National Number (2) NPI:
>
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '93454395' ]
>
>>Sending Complete (len= 0)
>
> -- Called 2/93454395
> < Protocol Discriminator: Q.931 (8) len=13
> < Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
> < Message type: STATUS (125)
> < Cause (len= 3) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
> Public network serving the local user (2)
> < Ext: 1 Cause: Info. element nonexist or not implemented
> (99), class = Protocol Error (6) ]
> < Cause data 0: 01 (1)
> < Call State (len= 1) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state:
> Call Initiated (1)
> -- Processing IE 8 (Cause)
> -- Processing IE 20 (Call State)
> < Protocol Discriminator: Q.931 (8) len=10
> < Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
> < Message type: CALL PROCEEDING (2)
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified Channel Type: 3
> < Ext: 1 Channel: 2 ]
> -- Processing IE 24 (Channel Identification)
> < Protocol Discriminator: Q.931 (8) len=13
> < Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
>
> < Message type: DISCONNECT (69)
> < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
> Public network serving the remote user (4)
> < Ext: 1 Cause: Normal, unspecified (31), class = Normal
> Event (1) ]
> < Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
> 0 Location: Public network serving the local user (2)
> < Ext: 1 Progress Description: Inband
> information or appropriate pattern now available. (8) ]
> -- Processing IE 8 (Cause)
> -- Processing IE 30 (Progress Indicator)
> -- Channel 2, span 1 got hangup
> Feb 15 15:58:27 DEBUG[20497]: chan_zap.c:2185 zt_setoption: Set option AUDIO
> MODE, value: ON(1) on Zap/2-1
> Feb 15 15:58:27 DEBUG[20497]: chan_zap.c:1715 zt_hangup: Hangup: channel: 2
> index = 0, normal = 17, callwait = -1, thirdcall = -1
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> peerstate Disconnect Request
>
>>Protocol Discriminator: Q.931 (8) len=9
>>Call Ref: len= 2 (reference 6/0x6) (Originator)
>>Message type: RELEASE (77)
>>Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
>
> Private network serving the local user (1)
>
>> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
>
> (1) ]
> Feb 15 15:58:27 DEBUG[20497]: chan_zap.c:1133 zt_disable_ec: disabled echo
> cancellation on channel 2
> Feb 15 15:58:27 DEBUG[20497]: chan_zap.c:2095 zt_setoption: Set option TDD
> MODE, value: OFF(0) on Zap/2-1
> Feb 15 15:58:27 DEBUG[20497]: chan_zap.c:1076 update_conf: Updated
> conferencing on 2, with 0 conference usersFeb 15 15:58:27 DEBUG[20497]:
> chan_zap.c:2179 zt_setoption: Set option AUDIO MODE, value: OFF(0) on Zap/2-1
> Feb 15 15:58:27 DEBUG[20497]: chan_zap.c:1133 zt_disable_ec: disabled echo
> cancellation on channel 2
> -- Hungup 'Zap/2-1'
> == No one is available to answer at this time
> -- Executing Playback("IAX2[home at 10.0.10.2:4569]/3", "tt-allbusy") in
> new stack
> Feb 15 15:58:27 DEBUG[20497]: channel.c:958 ast_settimeout: Scheduling timer
> at 160 sample intervals
> -- Playing 'tt-allbusy' (language 'en')
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
> < Message type: RELEASE COMPLETE (90)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> Feb 15 15:58:28 WARNING[7176]: chan_iax2.c:4920 socket_read: Received mini
> frame before first full voice frame
> Feb 15 15:58:28 DEBUG[7176]: chan_iax2.c:4333 socket_read: Ooh, voice
> format changed to 2
> Feb 15 15:58:30 DEBUG[7176]: chan_iax2.c:4513 socket_read: Immediately
> destroying 3, having received hangup
> Feb 15 15:58:30 DEBUG[20497]: channel.c:958 ast_settimeout: Scheduling timer
> at 0 sample intervals
> == Spawn extension (macro-dialout, s, 5) exited non-zero on
> 'IAX2[home at 10.0.10.2:4569]/3' in macro 'dialout'
> == Spawn extension (inside, s, 1) exited non-zero on
> 'IAX2[home at 10.0.10.2:4569]/3'
> Feb 15 15:58:30 DEBUG[20497]: chan_iax2.c:1924 iax2_hangup: We're hanging up
> IAX2[home at 10.0.10.2:4569]/3 now...
> Feb 15 15:58:30 DEBUG[20497]: chan_iax2.c:1933 iax2_hangup: Really
> destroying IAX2[home at 10.0.10.2:4569]/3 now...
> -- Hungup 'IAX2[home at 10.0.10.2:4569]/3'
> Feb 15 15:59:00 DEBUG[7176]: chan_iax2.c:4513 socket_read: Immediately
> destroying 1, having received hangup
>
>
>
>
>
> Here is a working incoming call...
> < Protocol Discriminator: Q.931 (8) len=44
> < Call Ref: len= 2 (reference 186/0xBA) (Originator)
> < Message type: SETUP (5)
> < Sending Complete (len= 4)
> < Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> < Ext: 1 Trans mode/rate: 64kbps, circuit-mode
> (16)
> < Ext: 1 User information layer 1: A-Law (35)
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred
> Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified Channel Type: 3
> < Ext: 1 Channel: 1 ]
> < Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> < Presentation: Presentation permitted, user
> number passed network screening (1) '402078431' ]
> < Called Number (len=11) [ Ext: 1 TON: Subscriber Number (4) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '83040000' ]
> < IE: High-layer Compatibility (len = 4)
> -- Making new call for cr 186
> -- Processing Q.931 Call Setup
> -- Processing IE 33 (Sending Complete)
> -- Processing IE 4 (Bearer Capability)
> -- Processing IE 24 (Channel Identification)
> -- Processing IE 108 (Calling Party Number)
> -- Processing IE 112 (Called Party Number)
> -- Processing IE 125 (High-layer Compatibility)
> -- Going to extension s|1 because of immediate=yes
>
>>Protocol Discriminator: Q.931 (8) len=10
>>Call Ref: len= 2 (reference 32954/0x80BA) (Terminator)
>>Message type: CALL PROCEEDING (2)
>>Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
>
> Dchan: 0
>
>> ChanSel: Reserved
>> Ext: 1 Coding: 0 Number Specified Channel Type: 3
>> Ext: 1 Channel: 1 ]
>>Protocol Discriminator: Q.931 (8) len=14
>>Call Ref: len= 2 (reference 32954/0x80BA) (Terminator)
>>Message type: ALERTING (1)
>>Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
>
> Dchan: 0
>
>> ChanSel: Reserved
>> Ext: 1 Coding: 0 Number Specified Channel Type: 3
>> Ext: 1 Channel: 1 ]
>>Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
>
> 0 Location: Private network serving the local user (1)
>
>> Ext: 1 Progress Description: Inband
>
> information or appropriate pattern now available. (8) ]
> -- Executing Answer("Zap/1-1", "") in new stack
> -- Accepting call from '402078431' to 's' on channel 1, span 1
> Feb 15 16:00:15 DEBUG[8201]: chan_zap.c:1101 zt_enable_ec: Enabled echo
> cancellation on channel 1
>
>>Protocol Discriminator: Q.931 (8) len=14
>>Call Ref: len= 2 (reference 32954/0x80BA) (Terminator)
>>Message type: CONNECT (7)
>>Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
>
> Dchan: 0
>
>> ChanSel: Reserved
>> Ext: 1 Coding: 0 Number Specified Channel Type: 3
>> Ext: 1 Channel: 1 ]
>>Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
>
> 0 Location: Private network serving the local user (1)
>
>> Ext: 1 Progress Description: Called
>
> equipment is non-ISDN. (2) ]
> -- Executing DigitTimeout("Zap/1-1", "5") in new stack
> -- Set Digit Timeout to 5
> -- Executing ResponseTimeout("Zap/1-1", "10") in new stack
> -- Set Response Timeout to 10
> -- Executing SetMusicOnHold("Zap/1-1", "default") in new stack
> -- Executing NoOp("Zap/1-1", "") in new stack
> -- Executing BackGround("Zap/1-1", "local/Thanks_for_calling") in new stack
> Feb 15 16:00:15 DEBUG[21521]: channel.c:958 ast_settimeout: Scheduling timer
> at 160 sample intervals
> -- Playing 'local/Thanks_for_calling' (language 'en')
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 186/0xBA) (Originator)
> < Message type: CONNECT ACKNOWLEDGE (15)
> < Protocol Discriminator: Q.931 (8) len=13
> < Call Ref: len= 2 (reference 186/0xBA) (Originator)
> < Message type: DISCONNECT (69)
> < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
> User (0)
> < Ext: 1 Cause: Normal Clearing (16), class = Normal Event
> (1) ]
> < Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
> 0 Location: Public network serving the local user (2)
> < Ext: 1 Progress Description: Inband
> information or appropriate pattern now available. (8) ]
> -- Processing IE 8 (Cause)
> -- Processing IE 30 (Progress Indicator)
> -- Channel 1, span 1 got hangup
> Feb 15 16:00:18 DEBUG[21521]: channel.c:958 ast_settimeout: Scheduling timer
> at 0 sample intervals
> == Spawn extension (remote, s, 6) exited non-zero on 'Zap/1-1'
> Feb 15 16:00:18 DEBUG[21521]: chan_zap.c:2185 zt_setoption: Set option AUDIO
> MODE, value: ON(1) on Zap/1-1
> Feb 15 16:00:18 DEBUG[21521]: chan_zap.c:1715 zt_hangup: Hangup: channel: 1
> index = 0, normal = 16, callwait = -1, thirdcall = -1
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> peerstate Disconnect Request
>
>>Protocol Discriminator: Q.931 (8) len=9
>>Call Ref: len= 2 (reference 32954/0x80BA) (Terminator)
>>Message type: RELEASE (77)
>>Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
>
> Private network serving the local user (1)
>
>> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
>
> (1) ]
> Feb 15 16:00:18 DEBUG[21521]: chan_zap.c:1133 zt_disable_ec: disabled echo
> cancellation on channel 1
> Feb 15 16:00:18 DEBUG[21521]: chan_zap.c:2095 zt_setoption: Set option TDD
> MODE, value: OFF(0) on Zap/1-1
> Feb 15 16:00:18 DEBUG[21521]: chan_zap.c:1076 update_conf: Updated
> conferencing on 1, with 0 conference usersFeb 15 16:00:18 DEBUG[21521]:
> chan_zap.c:2179 zt_setoption: Set option AUDIO MODE, value: OFF(0) on Zap/1-1
> Feb 15 16:00:18 DEBUG[21521]: chan_zap.c:1133 zt_disable_ec: disabled echo
> cancellation on channel 1
> -- Hungup 'Zap/1-1'
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 186/0xBA) (Originator)
> < Message type: RELEASE COMPLETE (90)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>
>
> Any ideas would be greatly appreciated on how to get this working.
>
> Thanks,
> Adam
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list