[Asterisk-Users] modprobe wcfxs

[Tilghman Lesher]

On Friday 06 February 2004 16:26, Tim Sailer wrote:
> OK,  folks... I'm having the same problem as a few people. "device
> not found" when I do the modprobe wcfxs. I looked in the archives,
> and I see 4 or 5 people have had the same problem. I even foudn the
> reply to a post like mine that said "look in the archives, others
> have had the same problem". Very true, but I can't find the answer.
> If someone can simply point me to the archive with the solution, I
> can go from there. :)

A common problem is forgetting to connect the 4-pin molex on the side
of the card.  If you're still having problems, you could try a greater
wattage power supply or a different motherboard.

It's strange, but while the TDM400P is up to the PCI spec, some
motherboards are deficient.  It is only when inserting a card which
stresses the PCI spec to the max that you may wind up discovering
this.

Also, if your TDM400P does not have a molex connector, you can get
a free upgrade from the company that sold you the TDM400P.

-Tilghman