[Asterisk-Users] Voicemail and Zapatel

[Lyle Giese]

Not knowing where you are or your local telco, a lot use battery removal for
disconnect and ls ignores that and ks sees and disconnects on that signal.

Lyle

----- Original Message ----- 
From: "Adi Linden" <adil at adis.on.ca>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, December 30, 2004 12:04 PM
Subject: Re: [Asterisk-Users] Voicemail and Zapatel


> On Thu, 30 Dec 2004, Lyle Giese wrote:
>
> > Is your X100P set for loop start or Kewl Start?  I am betting loop
start,
> > try changing to ks instead.
> >
> > Lyle
>
> This is what I have in /etc/asterisk/zapata.conf so it should be Kewl
> Start.
>
> [channels]
> ; X100P
> signalling=fxs_ks
> echocancel=yes          ; You can set this to 32, 64, or 128,
>                         ; tweak to your needs.
> echocancelwhenbridged=yes
> echotraining=400        ; Asterisk trains to the beginning of the call,
>                         ; number is in milliseconds
> usecallerid=no          ; This cause Asterisk to answer the call
> immediately
> ;callerid=asreceived
> context=inbound-pstn-local
> group=1
> channel => 1
>
> Adi
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>