[Asterisk-Users] zapata.conf not being parsed by *

[Jerry Rasmussen]

That was it.  I compiled them in the wrong order.  You know sometimes it really pays to read the instructions

________________________________

From: asterisk-users-bounces at lists.digium.com on behalf of Jerry Rasmussen
Sent: Wed 12/29/2004 3:56 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] zapata.conf not being parsed by *


You know I think the I compiled them in the wrong order.  I bet you that is it.  I will give it a try and let you know.

________________________________

From: asterisk-users-bounces at lists.digium.com on behalf of Eric Wieling aka ManxPower
Sent: Wed 12/29/2004 3:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] zapata.conf not being parsed by *



Jerry Rasmussen wrote:
> Also when I try to dial outbound I get the following errors
> channel.c:1920 ast_request: No channel type registered for 'Zap' and
> Unable to create channel of type 'Zap' (cause 66).  My assumption is I am getting these errors because Zapata.conf is not being parsed

Or you have a noload => chan_zap.so in /etc/asterisk/modules.conf or you
installed Asterisk before you installed zaptel.  Install zaptel before
you install Asterisk or the chan_zap modules won't be built.

You should also confirm that ztcfg -vvv shows your card and the correct
ports.

--Eric
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4651 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041229/f4dd85b3/attachment.bin