[Asterisk-Users] Zaptel ISDN BRI settings for The Netherlands KPN

[Alessio Focardi]

Hello Remco,

Tuesday, December 28, 2004, 10:53:46 AM, you wrote:

RB> Does anybody know the correct settings for this? I will not have internet
RB> access there which makes it harder to google around on location.

RB> switchtype = euroisdn

RB> is pretty obvious but what about these settings:

RB> signalling = bri_cpe_ptmp

RB> ; p2p TE mode
RB> ;signalling = bri_cpe
RB> ; p2mp NT mode
RB> ;signalling = bri_net_ptmp
RB> ; p2p NT mode
RB> ;signalling = bri_net
RB> pridialplan=local
RB> prilocaldialplan=local
RB> ; trust user provided callerid (clip no screening)?
RB> pritrustusercid = yes

RB> immediate=yes


To my experience you will need bri_cpe as signaling (point2point),
immediate=no (if you have more than one numer on the ISDN),
pritrustusercid = no.

Regarding the pridialplan and prilocaldialplan I suggest to make some
experiment there.

Hope it helps !

-- 
Best regards,
 Alessio                            mailto:afoc at interconnessioni.it