[Asterisk-Users] TE410P to a Rhino CB-24 channel bank

Matt Schulte mschulte at netlogic.net
Wed Dec 22 11:49:29 MST 2004


Has anyone had any success with the Rhino CB-24? I can't get mine to
work, I tried all the obvious settings. The cb-24 gets stuck at init ESF
framing, as if it's not seeing the t1 card at all. It does get a t1
carrier (detecting voltage??) 

Help!
Thanks..

Everything appears to look good on the server, I did:

[zaptel.conf]
span=1,0,0,esf,b8zs
fxogs=1-24

[zapata.conf]
signalling=fxo_gs
channel => 1-24

Tried ks, ls, still no dice.

ztcfg -vvv reports:

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXO Groundstart (Default) (Slaves: 01)
Channel 02: FXO Groundstart (Default) (Slaves: 02)
Channel 03: FXO Groundstart (Default) (Slaves: 03)
Channel 04: FXO Groundstart (Default) (Slaves: 04)
Channel 05: FXO Groundstart (Default) (Slaves: 05)
Channel 06: FXO Groundstart (Default) (Slaves: 06)
Channel 07: FXO Groundstart (Default) (Slaves: 07)
Channel 08: FXO Groundstart (Default) (Slaves: 08)
Channel 09: FXO Groundstart (Default) (Slaves: 09)
Channel 10: FXO Groundstart (Default) (Slaves: 10)
Channel 11: FXO Groundstart (Default) (Slaves: 11)
Channel 12: FXO Groundstart (Default) (Slaves: 12)
Channel 13: FXO Groundstart (Default) (Slaves: 13)
Channel 14: FXO Groundstart (Default) (Slaves: 14)
Channel 15: FXO Groundstart (Default) (Slaves: 15)
Channel 16: FXO Groundstart (Default) (Slaves: 16)
Channel 17: FXO Groundstart (Default) (Slaves: 17)
Channel 18: FXO Groundstart (Default) (Slaves: 18)
Channel 19: FXO Groundstart (Default) (Slaves: 19)
Channel 20: FXO Groundstart (Default) (Slaves: 20)
Channel 21: FXO Groundstart (Default) (Slaves: 21)
Channel 22: FXO Groundstart (Default) (Slaves: 22)
Channel 23: FXO Groundstart (Default) (Slaves: 23)
Channel 24: FXO Groundstart (Default) (Slaves: 24)

24 channels configured.



More information about the asterisk-users mailing list