[Asterisk-Users] Troubleshooting Asterisk

[Paul Brock]

>How are your Cisco's connected to *, and do they register them self on the
>* if you reboot them?

sip show peers
Name/username	Host			Dyn Nat ACL	Mask
Port Status
2002/2002		192.168.1.152		N	255.255.255.255
5060 Always
2001/2001		192.168.1.151		N	255.255.255.255
5060 Alway

Sip show users
Username		secret	Accountcode		Def.Context	ACL
NAT
2002			2345					from-sip
No	Alway
2001			1234					from-sip
No	Alway

>How is the Cisco's configured, ip, gateway, etc. And which SIP Image do you
>use?

Ip : as above
Gateway : 192.168.1.150 (* server)
SIP Image : P0S3-06-3-00


>Something you could try is setting nat=no and adding canreinvite=no to the
>sip.conf

Done...Hasn't made any difference though...

>Perhaps you could turn off the Cisco's, restart * and Turn back on the
>Cisco's, and send the CLI output.

Hmm.. again.. nothing...however, since I'm using static Ip's for the phones,
so I guess that they would exist in * without registration.

Stupid although it may seem - you are _supposed_ to be able to make calls
from one sip phone to another through asterisk, internally, aren't you??

I'm off to look for a default cisco extension config, as I think this one
isn't working....

Paul