[Asterisk-Users] E100P / Brazilian Telco Problem. (Urgent)

[Jefferson Carvalho]

Hello list , ( sorry about the URGENT topic )

This is the second time that i configure a * box using
a E100P card. The only difference at this time is
that i´m using another Telco and the box have more
one card ( Wildcard - 2 FXS + 2 FXO ).
Well , everything looks fine i don´t have any kind of
alarms on my zttool , the board gives me a green
signal. BUT the span is Down :(

---------- My ztcfg -vvvvv ---------------

[root at voip root]# ztcfg -vvvvvv

Zaptel Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: Individual Clear channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: Individual Clear channel (Default) (Slaves: 06)
Channel 07: Individual Clear channel (Default) (Slaves: 07)
Channel 08: Individual Clear channel (Default) (Slaves: 08)
Channel 09: Individual Clear channel (Default) (Slaves: 09)
Channel 10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: Individual Clear channel (Default) (Slaves: 12)
Channel 13: Individual Clear channel (Default) (Slaves: 13)
Channel 14: Individual Clear channel (Default) (Slaves: 14)
Channel 15: Individual Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default) (Slaves: 17)
Channel 18: Individual Clear channel (Default) (Slaves: 18)
Channel 19: Individual Clear channel (Default) (Slaves: 19)
Channel 20: Individual Clear channel (Default) (Slaves: 20)
Channel 21: Individual Clear channel (Default) (Slaves: 21)
Channel 22: Individual Clear channel (Default) (Slaves: 22)
Channel 23: Individual Clear channel (Default) (Slaves: 23)
Channel 24: Individual Clear channel (Default) (Slaves: 24)
Channel 25: Individual Clear channel (Default) (Slaves: 25)
Channel 26: Individual Clear channel (Default) (Slaves: 26)
Channel 27: Individual Clear channel (Default) (Slaves: 27)
Channel 28: Individual Clear channel (Default) (Slaves: 28)
Channel 29: Individual Clear channel (Default) (Slaves: 29)
Channel 30: Individual Clear channel (Default) (Slaves: 30)
Channel 31: Individual Clear channel (Default) (Slaves: 31)
Channel 32: FXO Kewlstart (Default) (Slaves: 32)
Channel 33: FXO Kewlstart (Default) (Slaves: 33)
Channel 34: FXS Kewlstart (Default) (Slaves: 34)
Channel 35: FXS Kewlstart (Default) (Slaves: 35)
35 channels configured.

----- /------------
[root at voip root]# cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS ClockSource

           1 WCT1/0/1 Clear
           2 WCT1/0/2 Clear
           3 WCT1/0/3 Clear
           4 WCT1/0/4 Clear
           5 WCT1/0/5 Clear
           6 WCT1/0/6 Clear
           7 WCT1/0/7 Clear
           8 WCT1/0/8 Clear
           9 WCT1/0/9 Clear
          10 WCT1/0/10 Clear
          11 WCT1/0/11 Clear
          12 WCT1/0/12 Clear
          13 WCT1/0/13 Clear
          14 WCT1/0/14 Clear
          15 WCT1/0/15 Clear
          16 WCT1/0/16 HDLCFCS
          17 WCT1/0/17 Clear
          18 WCT1/0/18 Clear
          19 WCT1/0/19 Clear
          20 WCT1/0/20 Clear
          21 WCT1/0/21 Clear
          22 WCT1/0/22 Clear
          23 WCT1/0/23 Clear
          24 WCT1/0/24 Clear
          25 WCT1/0/25 Clear
          26 WCT1/0/26 Clear
          27 WCT1/0/27 Clear
          28 WCT1/0/28 Clear
          29 WCT1/0/29 Clear
          30 WCT1/0/30 Clear
          31 WCT1/0/31 Clear

-------- My zaptel.conf ---------
# E100P
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
defaultzone=br
loadzone=br
# Wildcard
fxoks=32-33
fxsks=34-35

--------- Zapata.conf ( only about E100P ) ------

group=3
switchtype=euroisdn
signalling=pri_cpe
context=incoming
channel => 1-15
channel => 17-31
----------------------------------
* Asterisk CLI *

voip*CLI> pri show span 1
Primary D-channel: 16
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

Any ideas why i´m getting *DOWN* status ????

Best Regards ,

-Jefferson Carvalho

P.s.: I´ve checked cable is it´s ok.