[Asterisk-Users] udev or not?

[Steven Critchfield]

On Thu, 2004-12-09 at 23:39 -0800, Lee wrote:
> I'm just getting started with asterisk on White Box Linux 3.0
> I have a x100p card in the PC.
> 
> If I reboot and immediately do a "ztcfg -vv" I get the well known
> "Unable to open master device '/dev/zap/ctl'. If I then do a "modprobe
> wcfxo" this error disappears and Asterisk runs fine.

> Asterisk runs fine as long as I do a modprobe wcfxo after each reboot,
> prior to running Asterisk. I can make and receive calls through the
> x100p. I would just like to solve the error issue. Thanks.

Check in /etc and look for a file with module in the name. On my debian
machine it is /etc/modules. In there you can place your wcfxo driver
name and it will auto load everytime.
-- 
Steven Critchfield <critch at basesys.com>