[Asterisk-Users] RE: Polycom 500 - Dialtone while connected

[Jorge Mendoza]

Andrei,

I'm interested too. Any chance to put the archive in a ftp site?.

Jorge Mendoza

Andrei (MPI) wrote:
> Adam,
> 
> I can send you 1.3.4 firmware. Please let me know if you can accept zip 
> archive of 10Mb to your email address.
> 
> But please consider that you may have to upgrade to 1.3.1 first (with 
> 2.5.0 boot rom), if you have not done so. The 1.3.1 files are available 
> here:
> 
> http://www.freedomphones.net/polycom/files/
> 
> Thank you,
> Andrei
> 
> Adam Robins wrote:
> 
>> As I am not a Polycom dealer, I cannot download the software from their
>> site.  Any alternative locations you know of?  Thanks.
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tor Setane
>> Sent: Thursday, December 09, 2004 7:47 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: [Asterisk-Users] RE: Polycom 500 - Dialtone while connected
>>
>>  
>>
>>> I just set up a Polycom 500 on *.  Every few calls I make, the >call
>>>   
>>
>> connects and the receiving party can hear me (thru >Broadvoice), but I
>> still get ringing on my end, as if they never >picked up.  * logs look
>> just fine.  Does any one have any >suggestions?  Thanks.
>>
>>
>> ________________________________________________________________________
>>
>>  
>>
>>> Adam S. Robins
>>> Executive Vice President & CIO
>>>   
>>
>>
>> Hi Adam, that should be fixed in sw.ver.1.3.4 from Polycom.
>> "ID Issue 9122 Local ringback tone continues after early media
>> received". Worked for us.
>>
>> -Tor.
>> _______________________________________________
>