[Asterisk-Users] Status of linux 2.6 support

Dave Cotton dcotton at linuxautrement.com
Fri Dec 3 10:21:41 MST 2004


On Fri, 2004-12-03 at 10:48 -0500, Joshua M. Thompson wrote:
> On Fri, 2004-12-03 at 08:39 -0500, Clint Guillot wrote:
> 
> > Any ideas on why the T1 cards won't come out of red alarm, but work 
> > fine on the same machine booted to 2.4?
> 
> It's quite possible you have an interrupt-related problem in 2.6 but not
> in 2.4, since 2.6 tries to fully utilize ACPI now. You might want to try
> booting with acpi=off and see if that fixes the situation.

While I don't have a T1 card, only an X100P and an original (no fxo)
TDM400, I was following this thread. I've had months of trouble with the
TDM all sorts of lockups etc. and over the last few days I've been
trying to sort it out as I want the analog ports. The card always worked
perfectly if the X100P was not in the machine. I've tried every
combination of slots, I thing I could shout a number and the cards would
move themselves now. 

Then I saw your post, rebooted with the above option and it seems to
have sorted it out, 30 mins without a lock up is a record.

-- 
Dave Cotton <dcotton at linuxautrement.com>





More information about the asterisk-users mailing list