[Asterisk-Users] "7" Dialing gives a busy signal
Lyle Giese
lyle at lcrcomputer.net
Fri Aug 27 18:37:35 MST 2004
These errors are not related to your dialing problems.
----- Original Message -----
From: Don Moskaluk
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Friday, August 27, 2004 8:28 PM
Subject: RE: [Asterisk-Users] "7" Dialing gives a busy signal
I'm now getting some error messages and warnings, see below. Are these related to my failure? Aug 27 19:54:40 WARNING[1076224640]: chan_iax2.c:6605 set_config: Ignoring port
for now
== Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2))
== Using TOS bits 16
== IAX Ready and Listening on 0.0.0.0 port 4569
== Loaded firmware 'iaxy.bin'
== Parsing '/etc/asterisk/iaxprov.conf': Not found (No such file or directory)Aug 27 19:54:40 NOTICE[1076224640]: iax2-provision.c:496 iax_provision_reload: No IAX provisioning configuration found, IAX provisioning disabled.
Aug 27 21:03:54 WARNING[1095489856]: chan_zap.c:1267 zt_set_hook: zt hook failed: Device or resource busy
Don Moskaluk
don at moskaluk.com
www.moskaluk.com
416 737-8230 Cell
416 614-8230 Home
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Don Moskaluk
Sent: Friday, August 27, 2004 9:14 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] "7" Dialing gives a busy signal
Here is my extensions.conf....
Thanks Don
;Don't forget to fetch the 'Asterisk Handbook' from www.asterisk.org!
;Read through it at least once before editing this file.
;the general 'context' is used to define some global variables for asterisk.
[general]
;these lines prevent you from rewriting the extensions.conf from the CLI
;we don't really recommend you try to do so, it's safer to edit the
;extensions.conf and run 'reload' at the CLI (which will not drop calls)
static=yes
writeprotect=no
;the dialout context can be included in contexts which should have access
;to an outside line
;This extension match matches dialing '9' from the phone on the FXS to
;the outside line.
[dialout]
;first step is to strip the 9 from the call, and not send it to Ma Bell.
;in short, stripmsd will strip the number of digits specified from the
;beginning of the dialed string. It will move on to the next priority
;in the new extension (i.e. _9NXXXXXX became _NXXXXXX when we stripped
;the '9' For a bit more info do 'show application stripmsd' from the
;asterisk CLI
;extension matches are preceeded by an underscore. other chars are either
;absolute digits or 'N' (for any number greater than 1) or 'X' (for any
;number
exten => _9NXXXXXX,1,StripMSD,1
;Then send the call out the FXO card to our incoming POTS line.
;BYEXTENSION is a special target we can send extension matches to.
;It will send the whole matching string as dialed.
exten => _NXXXXXX,2,Dial,Zap/4/BYEXTENSION
[home]
include => mailboxes
;set a music on hold class so we can play music for our callers when we park
;or transfer them.
exten => s,1,setmusiconhold,default
;set a response timeout so we can terminate the call or recycle the caller
;through the menu if they don't answer our voice prompts
exten => s,2,responsetimeout,20
;ring our zaptel channel 1 device for 20 seconds (the fxs interface, of course)
exten => s,3,Dial,Zap/1|20
;if nobody answers tell them how to use the voicemail system.
exten => s,4,Playback,thanks
exten => i,1,hangup
[mailboxes]
exten => 100,1,Voicemail,100
exten => 100,2,Hangup
exten => 101,1,Voicemail,101
exten => 101,2,Voicemail,
[bell]
;ignorepat will recieve the digit, but continue the dialtone. Most useful
;here. It has to be in the starting context of the incoming channel
ignorepat => 9
;include makes available all of the extensions in the included
;context in the context the include statement is placed in. In this case we
;grant access to dial out over the POTS to internal callers. We could probably
;skip this (since we only have one extenal line an incoming calers are
;already tying it up and place the extensions in here in this case, but
;this is a good habit to be in.
include => dialout
;enable call parking and retrieval (see asterisk handbook>application reference
;>call parking, or 'show application parkedcalls' in the Asterisk CLI)
include => parkedcalls
;of course we need to be able to check our voicemail!
exten => 6,1,Goto,home|s|1
exten => 8,1,VoicemailMain
exten => 8,2,Hangup
;and this little routine I add for recording the initial message. You should
;probably tell the user how to get to the voicemail boxes set up. No default
;audio file is supplied. You will have to use this to record a message
;or asterisk will hangup on the caller when it can't find the file.
exten => 7,1,Record,thanks:gsm
exten => 7,2,Wait,1
exten => 7,3,Playback,thanks
Don Moskaluk
don at moskaluk.com
www.moskaluk.com
416 737-8230 Cell
416 614-8230 Home
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Lyle Giese
Sent: Friday, August 27, 2004 9:14 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] "7" Dialing gives a busy signal
Post your extensions.conf. You probably have something goofed up in it.
Lyle
----- Original Message -----
From: Don Moskaluk
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Friday, August 27, 2004 7:58 PM
Subject: RE: [Asterisk-Users] "7" Dialing gives a busy signal
Oh' I'm any number other than 1 gives me a busy signal. I have two extension set up 100 and 101. Is there something I missed?
Don Moskaluk
don at moskaluk.com
www.moskaluk.com
416 737-8230 Cell
416 614-8230 Home
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Don Moskaluk
Sent: Friday, August 27, 2004 8:55 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] "7" Dialing gives a busy signal
sorry dialing "8" gives me a busy signal any other ideas?
Don Moskaluk
don at moskaluk.com
www.moskaluk.com
416 737-8230 Cell
416 614-8230 Home
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Lyle Giese
Sent: Friday, August 27, 2004 8:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] "7" Dialing gives a busy signal
VoiceMail is at 8600 via the demo.
Lyle
----- Original Message -----
From: Don Moskaluk
To: Asterisk
Sent: Friday, August 27, 2004 6:53 PM
Subject: [Asterisk-Users] "7" Dialing gives a busy signal
Newbie so please excuse if this question has been posted a billion times. I have install asterisk and seems to compile and run with out errors; however, when I try to dial "7" to configure the voice mail I get a busy signal.
Can someone help me please?
Don Moskaluk
don at moskaluk.com
www.moskaluk.com
416 737-8230 Cell
416 614-8230 Home
------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040827/c149e80b/attachment.htm
More information about the asterisk-users
mailing list