[Asterisk-Users] Faxing with SPANDSP or any other mean ? Is itpossible ? Am I dreaming ?

[Jean-François Rousseau]

Hi,

I've read the FAQ and tried to find a timing source. So far, I've compiled
ztdummy and loaded it sucessfully. But it still not working. All I have is
the beginning of the fax.

I've tried (HP FAX) --> PSTN --> X100P --> Asterisk -- > SPANDSP

And (HP FAX) --> IAXy --> Asterisk --> SPANDSP 

Both do the same error...  About a quarter of the page is ok then garbage.
The sending machine say that the fax was sent ok.

Here is some info that might help troubleshot my problem.

 


___________________________
Jean-François Rousseau
Sys-Tech
www.sys-tech.net
jrousseau at sys-tech.net
Tél. 24h (418) 520-0739
Télec.   (418) 520-4554
Ligne directe 1-866-274-4870
Bâtisseurs de solutions informatiques et électroniques
urgence at sys-tech.net
1-877-969-tech
Messages de confidentialité : Ce courriel (de même que les fichiers joints)
est strictement réservé à l'usage de la personne ou de l'entité à qui il est
adressé et peut contenir de l'information privilégiée et confidentielle.
Toute divulgation, distribution ou copie de ce courriel est strictement
prohibée. Si vous avez reçu ce courriel par erreur, veuillez nous en aviser
sur-le-champ, détruire toutes les copies et le supprimer de votre système
informatique. If you can not understand this clause, please contact us for
further information because it contain a legal notice.


-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Steve
Underwood
Envoyé : 26 août 2004 06:12
À : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : Re: [Asterisk-Users] Faxing with SPANDSP or any other mean ? Is
itpossible ? Am I dreaming ?

Stopping in mid page is usually a timing problem. See the spandsp FAQ.

Regards,
Steve


Jean-François Rousseau wrote:

>Hi , does anybody have successfully received a full fax with spandsp ? 
>I keep having only about a quarter of the page and then the other part 
>is garbage. Does anybody have any solution for this ?
>
>Right now I've tried:
>
>FAX ---> IAXy ---> ASTERISK ---> SPANDSP
>
>And
>
>FAX ---> PSTN ---> X100P --> ASTERISK ---> SPANDSP
>
>
>And both don't work, they give me only part of the page
>
>
>
>
>BTW, I also tried the fax on a local lan over an IAXy or on the PSTN 
>with an X100P. Is there something I should know about faxing and theses 
>two interfaces ?
>
>I also tried to Fax thru asterisk and it didn't work either   FAX ---->
IAXy
>---> ASTERISK ---> X100P ---> PSTN ---> FAX
>
>Finally my last test: FAX --> IAXy --> ASTERISK --> SIP (Iconnecthere) 
>--> PSTN --> FAX didn't work too.
>
>Is there something I should know about faxing and Asterisk ? Should I 
>use a Sipura SIP FXS ?
>
>P.S. I did start the ntp server to make sure timing was ok.
>
>Thanks in advance
>
>___________________________
>Jean-François Rousseau
>Sys-Tech
>www.sys-tech.net
>jrousseau at sys-tech.net
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users