X-SBClass: Spam ( Re: [Asterisk-Users] TDM400P Problems)
PHP Mechanic
oliver.bode at phpmechanic.com
Thu Aug 26 23:31:34 MST 2004
I have a problem in that the pci card is not detected at all. Other pci
cards are detected fine but not the tdm400b. It's detected on a different -
smaller - machine no probs. Any ideas of the magic bios setting to get it
going?
----- Original Message -----
From: "Lyle Giese" <lyle at lcrcomputer.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Friday, August 27, 2004 12:41 PM
Subject: X-SBClass: Spam ( Re: [Asterisk-Users] TDM400P Problems)
> Have you checked to see if there is a newer bios for the motherboard?
> ----- Original Message -----
> From: "Greg Hulands" <ghulands at framedphotographics.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Thursday, August 26, 2004 9:31 PM
> Subject: Re: [Asterisk-Users] TDM400P Problems
>
>
> > Even when the tdm400 is the only card in the computer, it still has
> > this problem. I'm not sure how I would go about determining what is
> > causing it. I have reset the bios to its factory settings to see if
> > that helped, but alas it did not. Seems like i'm screwed.
> >
> > Greg
> >
> > On 27/08/2004, at 12:12 PM, Lyle Giese wrote:
> >
> > > My guess is that you have PCI bus compatibility problems of some sort.
> > > Moving the cards around may help. Using a plug in NIC may help. A
> > > different Motherboard may help.
> > >
> > > This looks like hardware and trial and error and experience is all you
> > > have
> > > to lead you forward, if my guess is right.
> > >
> > > Lyle
> > >
> > > ----- Original Message -----
> > > From: "Greg Hulands" <ghulands at framedphotographics.com>
> > > To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> > > <asterisk-users at lists.digium.com>
> > > Sent: Thursday, August 26, 2004 8:11 PM
> > > Subject: Re: [Asterisk-Users] TDM400P Problems
> > >
> > >
> > >> When I did the lspci -v when it got to the tdm400p it seemed to go
> > >> into
> > >> an infinite loop on this line:
> > >> Capabilities: [80] #00 [0000]. When I redirected output to a file it
> > >> filled to 8MB in about 3 seconds with this line.
> > >> I moved the NIC so that it would be before the tdm400p, but it still
> > >> did the same thing.
> > >>
> > >> I haven't a clue what is going on here.
> > >>
> > >> Any help is greatly appreciated.
> > >>
> > >> Regards,
> > >> Greg
> > >>
> > >> Here is the output:
> > >>
> > >> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> > >> version?) (rev c1)
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0
> > >> Memory at d0000000 (32-bit, prefetchable)
> > >> Capabilities: [40] AGP version 2.0
> > >> Capabilities: [60] #08 [2001]
> > >>
> > >> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
> > >> (rev
> > >> c1)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: 66Mhz, fast devsel
> > >>
> > >> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
> > >> (rev
> > >> c1)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: 66Mhz, fast devsel
> > >>
> > >> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
> > >> (rev
> > >> c1)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: 66Mhz, fast devsel
> > >>
> > >> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
> > >> (rev
> > >> c1)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: 66Mhz, fast devsel
> > >>
> > >> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
> > >> (rev
> > >> c1)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: 66Mhz, fast devsel
> > >>
> > >> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0
> > >> Capabilities: [48] #08 [01e1]
> > >>
> > >> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: 66Mhz, fast devsel, IRQ 12
> > >> I/O ports at bc00
> > >> Capabilities: [44] Power Management version 2
> > >>
> > >> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
(rev
> > >> a4) (prog-if 10 [OHCI])
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
> > >> Memory at e4002000 (32-bit, non-prefetchable)
> > >> Capabilities: [44] Power Management version 2
> > >>
> > >> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
(rev
> > >> a4) (prog-if 10 [OHCI])
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 9
> > >> Memory at e4003000 (32-bit, non-prefetchable)
> > >> Capabilities: [44] Power Management version 2
> > >>
> > >> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
(rev
> > >> a4) (prog-if 20 [EHCI])
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5
> > >> Memory at e4004000 (32-bit, non-prefetchable)
> > >> Capabilities: [44] #0a [2080]
> > >> Capabilities: [80] Power Management version 2
> > >>
> > >> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
> > >> Audio Controler (MCP) (rev a1)
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 12
> > >> I/O ports at c000
> > >> I/O ports at b000 [size=128]
> > >> Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
> > >> Capabilities: [44] Power Management version 2
> > >>
> > >> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
> > >> (rev
> > >> a3) (prog-if 00 [Normal decode])
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0
> > >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> > >> I/O behind bridge: 00009000-00009fff
> > >> Memory behind bridge: e2000000-e3ffffff
> > >> Expansion ROM at 00009000 [disabled] [size=4K]
> > >>
> > >> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
> > >> (prog-if
> > >> 8a [Master SecP PriP])
> > >> Subsystem: Unknown device 17f2:3401
> > >> Flags: bus master, 66Mhz, fast devsel, latency 0
> > >> I/O ports at f000 [size=16]
> > >> Capabilities: [44] Power Management version 2
> > >>
> > >> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if
> > >> 00
> > >> [Normal decode])
> > >> Flags: bus master, 66Mhz, medium devsel, latency 32
> > >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> > >> I/O behind bridge: 0000a000-0000afff
> > >> Memory behind bridge: e0000000-e1ffffff
> > >> Prefetchable memory behind bridge: d8000000-dfffffff
> > >> Expansion ROM at 0000a000 [disabled] [size=4K]
> > >>
> > >> 01:07.0 Network controller: Individual Computers - Jens Schoenfeld
> > >> Intel 537 (prog-if 80)
> > >> Subsystem: Unknown device b100:0001
> > >> Flags: bus master, medium devsel, latency 160, IRQ 10
> > >> I/O ports at 9000
> > >> Memory at e3009000 (32-bit, non-prefetchable) [size=4K]
> > >> Memory at <ignored> (32-bit, non-prefetchable)
> > >> Memory at <ignored> (32-bit, non-prefetchable)
> > >> Memory at <ignored> (32-bit, non-prefetchable)
> > >> Memory at <ignored> (32-bit, non-prefetchable)
> > >> Capabilities: [40] Power Management version 2
> > >> Capabilities: [80] #00 [0000]
> > >> Capabilities: [80] #00 [0000]
> > >> Capabilities: [80] #00 [0000]
> > >> Capabilities: [80] #00 [0000]
> > >> Capabilities: [80] #00 [0000]
> > >> Capabilities: [80] #00 [0000]
> > >>
> > >> On 27/08/2004, at 10:30 AM, Lyle Giese wrote:
> > >>
> > >>> lspci -v should show more helpfull info, including I/O memory
> > >>> addresses.
> > >>>
> > >>> Lyle
> > >>> ----- Original Message -----
> > >>> From: "Greg Hulands" <ghulands at framedphotographics.com>
> > >>> To: <asterisk-users at lists.digium.com>
> > >>> Sent: Thursday, August 26, 2004 7:11 PM
> > >>> Subject: [Asterisk-Users] TDM400P Problems
> > >>>
> > >>>
> > >>>> Hi,
> > >>>> I have just started to setup and configure my asterisk box and am
> > >>>> having trouble with it. I have a dlink nic in the box as well as
the
> > >>>> digium card. When the nic is in there by itself it works, but when
I
> > >>>> put the tdm400p in, there seems to be some sort of conflict with
the
> > >>>> network card. The tdm appears as another type of network card,
> > >>>> which I
> > >>>> don't think it should, should it? It shows up in lspci as 01:08.0
> > >>>> Network controller: Individual Computers - Jens Schoenfeld Intel
> > >>>> 537.
> > >>>>
> > >>>> Does anyone know why this would be happening?
> > >>>>
> > >>>> Any help is greatly appreciated.
> > >>>>
> > >>>> Regards,
> > >>>> Greg
> > >>>>
> > >>>> lspci with only network card in.
> > >>>>
> > >>>> [root at localhost root]# lspci
> > >>>> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> > >>>> version?) (rev c1)
> > >>>> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> > >>>> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> > >>>> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
> > >>>> (rev
> > >>>> a4)
> > >>>> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
> > >>>> (rev
> > >>>> a4)
> > >>>> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
> > >>>> (rev
> > >>>> a4)
> > >>>> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97
> > >>>> Audio Controler (MCP) (rev a1)
> > >>>> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
> > >>>> (rev
> > >>>> a3)
> > >>>> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
> > >>>> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
> > >>>> 01:0a.0 Ethernet controller: VIA Technologies, Inc. VT86C100A
> > >>>> [Rhine]
> > >>>> (rev 06)
> > >>>> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100
> > >>>> QY
> > >>>> [Radeon 7000/VE]
> > >>>> [root at localhost root]# cat /proc/interrupts
> > >>>> CPU0
> > >>>> 0: 324262 XT-PIC timer
> > >>>> 1: 76 XT-PIC i8042
> > >>>> 2: 0 XT-PIC cascade
> > >>>> 5: 0 XT-PIC NVidia nForce2
> > >>>> 8: 1 XT-PIC rtc
> > >>>> 9: 0 XT-PIC acpi, ehci_hcd
> > >>>> 11: 1025 XT-PIC ohci_hcd, eth0
> > >>>> 12: 26249 XT-PIC ohci_hcd, radeon at PCI:2:0:0
> > >>>> 14: 14408 XT-PIC ide0
> > >>>> NMI: 0
> > >>>> ERR: 0
> > >>>> [root at localhost root]#
> > >>>>
> > >>>> lspci with network card and tdm400p in
> > >>>>
> > >>>> [root at localhost root]# lspci
> > >>>> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> > >>>> version?) (rev c1)
> > >>>> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
> > >>>> (rev
> > >>>> c1)
> > >>>> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> > >>>> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> > >>>> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
> > >>>> (rev
> > >>>> a4)
> > >>>> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
> > >>>> (rev
> > >>>> a4)
> > >>>> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
> > >>>> (rev
> > >>>> a4)
> > >>>> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97
> > >>>> Audio Controler (MCP) (rev a1)
> > >>>> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
> > >>>> (rev
> > >>>> a3)
> > >>>> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
> > >>>> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
> > >>>> 01:08.0 Network controller: Individual Computers - Jens Schoenfeld
> > >>>> Intel 537
> > >>>> 01:0a.0 Ethernet controller: Unknown device 9106:3043 (rev 06)
> > >>>> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100
> > >>>> QY
> > >>>> [Radeon 7000/VE]
> > >>>> [root at localhost root]# cat /proc/interrupts
> > >>>> CPU0
> > >>>> 0: 566133 XT-PIC timer
> > >>>> 1: 141 XT-PIC i8042
> > >>>> 2: 0 XT-PIC cascade
> > >>>> 5: 0 XT-PIC ehci_hcd
> > >>>> 8: 1 XT-PIC rtc
> > >>>> 9: 2730 XT-PIC acpi, ohci_hcd
> > >>>> 11: 46773 XT-PIC ohci_hcd, radeon at PCI:2:0:0
> > >>>> 12: 0 XT-PIC NVidia nForce2
> > >>>> 14: 16583 XT-PIC ide0
> > >>>> NMI: 0
> > >>>> ERR: 18
> > >>>>
> > >>>> _______________________________________________
> > >>>> Asterisk-Users mailing list
> > >>>> Asterisk-Users at lists.digium.com
> > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >>>> To UNSUBSCRIBE or update options visit:
> > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >>>>
> > >>> _______________________________________________
> > >>> Asterisk-Users mailing list
> > >>> Asterisk-Users at lists.digium.com
> > >>> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >>> To UNSUBSCRIBE or update options visit:
> > >>> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >>>
> > >>
> > >> _______________________________________________
> > >> Asterisk-Users mailing list
> > >> Asterisk-Users at lists.digium.com
> > >> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >> To UNSUBSCRIBE or update options visit:
> > >> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >>
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list