[Asterisk-Users] H323 outgoing calls

[Daniel Bichara]

Hi Darren,

Ok, asterisk's H.323 channels works fine. Do you know why you get 
disconnect from (or can't connect to) your provider? There are some 
debug available (h.323 debug command).

Probably,  if you must use G.729 or G.723, you should know you need to 
buy licenses for this codecs. If you wish to use G.729, you can buy your 
licenses from Digium, install the licenses and recompile * with G.729 
support.

Daniel


Darren Wiebe wrote:

> Does asterisk support using an H.323 provider for outgoing calls?  
> From everything I have found, it looks like it does.  However, I have 
> had no success in getting it to work.  I would really appreciate if 
> somebody could give me a hand.  I am using the channel that comes with 
> asterisk.  I have also tried using the channel from inaccessnetoworks 
> but have not had any more success. My provider has not been able to 
> help a lot but they have confirmed that I am using the correct dial 
> string.  They have also confirmed that they only support  G729 and 
> G723.  Sorry about the long post, I thought I better send all the info 
> though.
>
> Darren Wiebe
> aleph at hagenhomes.com
>
> chan_h323.so              The NuFone Network's Open H.323 Channel  0
>
>
> This is the result of the following callfile:
>
>  -- Attempting call on h323/101014037402962 at 65.17.207.253 for 
> 9999 at meetme:1 (Retry 1)
> Aug 19 09:18:30 WARNING[-1273607248]: channel.c:1659 ast_request: No 
> translator path exists for channel type h323 (native 257) to 64
> Aug 19 09:18:30 NOTICE[-1273607248]: channel.c:1597 
> __ast_request_and_dial: Unable to request channel 
> h323/101014037402962 at 65.17.207.253
> Aug 19 09:18:30 NOTICE[-1273607248]: pbx_spool.c:235 attempt_thread: 
> Call failed to go through, reason 0
>
> Callfile:
> MaxRetries: 2
> extension: 9999
> Channel: h323/101014037402962 at 65.17.207.253
> CallerID: LAKEVIEW 4037422000
>
> This is my h323.conf file:
>
> ; The NuFone Network's
> ; Open H.323 driver configuration
> ;
> [general]
> port = 1720
> bindaddr = 0.0.0.0
> disallow=all
> allow=g723.1    ; Hm...  Proprietary, don't use it...
> allow=g729
>
> dtmfmode=rfc2833
>
> gatekeeper = 65.17.207.253
>
> context=incoming
>
> [h323]
> type=h323
> prefix=1010
> context=outgoing
>
>
>
> If I enable all the codecs and switch debug on then this is my output.
>   -- Attempting call on h323/101014037402962 at 65.17.207.253 for 
> 9999 at meetme:1 (Retry 1)
> Aug 19 09:23:09 NOTICE[-1273545808]: pbx_spool.c:235 attempt_thread: 
> Call failed to go through, reason 1
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>