[Asterisk-Users] R X100P connected to Meridan-1 system will notdisconnect call

[Reid A. Forrest]

Try using kewlstart. signaling=fxs_ks in zapata.conf and signaling=fxsks in
zaptel.conf.


________________________________

	From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mark
	Sent: Tuesday, August 24, 2004 3:02 PM
	To: asterisk-users at lists.digium.com
	Subject: [Asterisk-Users] R X100P connected to Meridan-1 system will
notdisconnect call
	
	

	 

	 

	Hi all,

	I am hoping that someone has experienced a similar problem to mine. I
have a X100P connected to a Nortel Meridan-1 PBX system via an analog
extension. When the extension is called and then hung up the X100P refuses to
disconnect the call. I have to reload Asterisk to free up the channel. Also
is there a way to make the X100P answer the call in less than the default tow
rings?

	Below are the settings that I am currently using in my configuration
files:

	 

	In Zapata.conf:

	 

	Busydetect=yes

	Callprogress=yes

	Signaling=fxs_ls

	 

	Zaptel.conf

	 

	 

	Signaling=fxsls

	 

	I have also tried using ground start but it does not work.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040824/062395bd/attachment.htm