[Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

[Matthew Boehm]

I could use some skinny/Cisco help here.  Was finally able to get the phone
registered to * but whenever someone tries to call that phone it freezes and
reboots itself. Same thing happens when you pick the handset up off the
7960G; it locks and reboots about 5 sec later.

Here is what * shows when I plug the phone in:

    -- Starting Skinny session from 64.72.107.1
Device SEP000F3442E4A7 is attempting to register
    -- Device 'Matthew' successfuly registered
Requesting capabilities
RECEIVED UNKNOWN MESSAGE TYPE:  2b
Received CapabilitiesRes
RECEIVED UNKNOWN MESSAGE TYPE:  2b
Buttontemplate requested
Recieved SoftKey Template Request
Received SoftKeySetReq
Received LineStateReq
RECEIVED UNKNOWN MESSAGE TYPE:  2d
Received Time/Date Request

And when I pick up the hand set:

-- Starting simple switch on '100 at Matthew'

No dialtone heard. 5 seconds later phone reboots.

------------------------------------------------------

Model: CP-7960G
App Load ID: P00306000400
Boot Load ID: PC030301001

Asterisk CVS-HEAD-07/14/04-12:20:42

skinny.conf
------------------
[Matthew]
device=SEP000F3442E4A7
version=P00306000400
nat=yes
callerid="Matthew Boehm" <3044>
transfer=1
callwaiting=1
threewaycalling=1
context=matthew
linelabel=my line lable
mailbox=100
line => 100
dtmfmode=rfc2833

Any help on this would be appreciated.

Thanks,
Matthew