[Asterisk-Users] just-added second X100P

[spectro]

I ran it like 10 times just in case:

[root at pbx asterisk]# ztcfg -vv                  
                                                
Zaptel Configuration                            
======================                          
                                                
                                                
Channel map:                                    
                                                
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
                                                
2 channels configured.                          


pbx*CLI> zap show channels                               
   Chan Extension  Context         Language   MusicOnHold
 pseudo            inbound-analog                        
      1            inbound-analog                        
      2            inbound-analog                        


Still not working. 



On Sat, 21 Aug 2004 09:30:19 -0700, Mike Benoit <ipso at snappymail.ca> wrote:
> Although it shouldn't make a difference, try:
> 
> channel => 1-2
> 
> As well, did you run ztcfg after you installed the new card? I've found
> sometimes I've had run ztcfg a couple times before Asterisk would "kick
> in" and recognize a new card.
> 
> 
> 
> On Sat, 2004-08-21 at 02:49 -0500, spectro wrote:
> > I just added a second X100P card to my * server, altough it seems to
> > be working * seems to be ignoring it:
> >
> > zaptel.conf:
> > -----------------
> > fxsks=1-2
> > loadzone=us
> > defaultzone=us
> >
> > zapata.conf:
> > ------------------
> > context=inbound-analog
> > signalling=fxs_ks
> > group=1
> > channel => 1
> > channel => 2
> >
> >
> > I created a couple of test extensions:
> >
> > ; test extensions
> > exten => 4390,1,Dial(Zap/g1/4189)
> > exten => 4390,2,Congestion
> > exten => 4391,1,Dial(Zap/1/4189)
> > exten => 4391,2,Congestion
> > exten => 4392,1,Dial(Zap/2/4189)
> > exten => 4392,2,Congestion
> >
> > 4391 works fine, 4392 doesn't:
> >
> >     -- Executing Dial("IAX2/vperez at vperez/2", "Zap/2/4189") in new stack
> > Aug 21 02:47:36 NOTICE[426002]: app_dial.c:714 dial_exec: Unable to create chann
> > el of type 'Zap'
> >   == Everyone is busy/congested at this time
> >
> > I don't know what's wrong, Zap/2 shows fine in the zap channels list:
> >
> > pbx*CLI> zap show channels
> >    Chan Extension  Context         Language   MusicOnHold
> >  pseudo            inbound-analog
> >       1            inbound-analog
> >       2            inbound-analog
> >
> >
> > Any ideas?
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> Mike Benoit <ipso at snappymail.ca>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>