[Asterisk-Users] TE410P - ZT_CHANCONFIG failed

[Arnaud Pignard]

Ok, i haven't get in hand the card and make remote hardware install.

It's certainely the problem.

Thanks !

At 22:49 20/08/2004, you wrote:
>On Fri, 20 Aug 2004, Arnaud Pignard wrote:
>
> > I try setup a TE410P. Already setup E100P without problem. I also check
> > sample zaptel.conf config in mailing list and seems my config is ok.
> > However when i modprobe wct4xxp, here is error output :
> >
> > ZT_CHANCONFIG failed on channel 97: No such device or address (6)
> > FATAL: Error running install command for wct4xxp
>
>Have you configured the spans for E1 signalling? It sound like you have
>them set for T1 signalling (24*4=96). You should check the jumpers on the
>card.
>
>Peter
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users