[Asterisk-Users] Vlan question

[Mark Woods]

Your switch has to support vlan trunking, ie. 802.1q.  You will have to 
set the switch port to trunk, allowing the vlans that you want to be 
avilable, then you will set the phone to trunk those two vlans, 
assigning one to the pc port.

-Mark

>----- Original Message ----- 
>From: tmeeks at che-llp.com
>To: asterisk-users at lists.digium.com
>Sent: 13 Aug 04, 2:38 PM
>Subject: [Asterisk-Users] Vlan question
>
>Hi, 
>
>I am setting up an Asterisk system with Cisco 7960 phones.  I have a PoE injector to insert between the patch panel and HP 2626 switch.  I plan to plug the users pc into the phone and the phone into the wall.  I would like the phones to have a seperate subnet from the phones for performance reasons. 
>
>May be a silly question, but with the pc and phone sharing the same switch port, how will it know to seperate the traffic and subnets? 
>
>Thanks 
>
>tm 
>
>ID:[{20040813172548.30403.1811044938-12.6.18.86}]
> 
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>