[Asterisk-Users] Answer a specific channel

[Ravi Hanumaiah]

This may be a ridiculous question, but here is my problem I have 4 X100P's. 

Three of them need to be outbound only, no answering at all. Additionally I
need 

one X100P to be in bound/outbound. I have used the default Extension
configuration.

I put in/outbound in the context.

 

Zapa.conf 

 

[default]

group=1

channel= 1

 

[local]

Group=1,2

Channel=2-4

 

I thought this made sense, but every channel answers if it rings. I can get
them never to answer, if 

I put them in some non-defined context, but the minute one of them is in a
valid context, they 

Answer. I thought it was the pickup groups, or call groups so I removed
them. Any insight would be 

Much appreciated. I must not have a grasp of the contexts. I found a context
in sip.conf and got very 

Confused. 

 

 

Ravi Hanumaiah

Senior Network Engineer III

Lan/WAN/Specialist

ravi at network-services.planetdns.net
<mailto:ravi at network-services.planetdns.net> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040816/25dc6731/attachment.htm