[Asterisk-Users] HELP with HFC Card, please

[Sascha Growe]

Hi All,

what is this?
This happens after calling "make loadNT"
And I can't do anything with this HFC Card, but the installscript from
bri-stuff finished successfully!

Aug 17 02:31:42 server kernel: zaphfc: freed one card.
Aug 17 02:33:27 server kernel: PCI: Enabling device 00:12.0 (0000 ->
0003)
Aug 17 02:33:27 server kernel: PCI: Found IRQ 10 for device 00:12.0
Aug 17 02:33:27 server kernel: PCI: Sharing IRQ 10 with 00:0e.0
Aug 17 02:33:27 server kernel: zaphfc: CCD/Billion/Asuscom 2BD0
configured at mem 0xd898ff00 fifo 0xcd088000(0xd088000) IRQ 10
 HZ 100
Aug 17 02:33:27 server kernel: zaphfc: Card 0 configured for NT mode
Aug 17 02:33:27 server kernel: zaphfc: 1 hfc-pci card(s) in this box.
Aug 17 02:33:27 server kernel: Registered tone zone 3 (Netherlands)
Aug 17 02:33:27 server kernel: zaphfc: bchan rx fifo not enough bytes to
receive! (z1=8191, z2=8191, wanted 8 got 1), probably
 a buffer overrun.
Aug 17 02:33:32 server last message repeated 8869 times
Aug 17 02:33:32 server kernel: un.
Aug 17 02:33:32 server kernel: zaphfc: bchan rx fifo not enough bytes to
receive! (z1=8191, z2=8191, wanted 8 got 1), probably
 a buffer overrun.


Sascha