[Asterisk-Users] Re: GS HandyTone-286 Transfer Problem, can anyone confirm?

[Dennis Cartier]

Thanks!!! That works. A bit cumbersome but at least it works.

Why does putting someone on hold and then taking them off again make
the ATA (or *) recognize the # key as transfer?

Thankyou for your help

On Sun, 15 Aug 2004 11:49:50 +0800, MPlus <meritplus at time.net.my> wrote:
> For blind transfers, press flash twice, then press #.
> For consultative transfers, press flash once, talk to the other party and
> tells him to hangup, press flash again, then press #.
> 
> 
> 
> ----- Original Message -----
> From: "Dennis Cartier" <dennis.cartier at gmail.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Sunday, August 15, 2004 2:10 AM
> Subject: Re: Re: [Asterisk-Users] Re: GS HandyTone-286 Transfer Problem, can
> anyone confirm?
> 
> > Unfortunately the Cisco ATA-186 does not support iLBC which means
> > extra costs for purchasing 729 licenses. The ATA-286 works fine other
> > than this 1 issue.
> >
> > Do the Grandstream developers follow this list?? This problem has been
> > persistent for a LONG time and each new firmware version still has it
> > unfixed!!
> >
> >
> > On Sat, 14 Aug 2004 19:36:43 +0300, Lubomir Christov
> > <voip at minitelecom.org> wrote:
> > >
> > > Yes, we are experiencing the same problem and because of that we
> > > switched the called HT ata to Cisco ATA 186 ...
> > >
> > > Lubo
> > >
> > >
> > >
> > > Andy Lee wrote:
> > > > [ Message pasted from Sun, 7 Mar 2004 08:27:54 -0600 ]
> > > >
> > > >>The problem I'm experiencing with many GS adapters, regardless of
> > > >>firmware version is this.  Call from one phone to another phone using
> > > >>both the 'T' and 't' flags in the Dial() command.  After they are
> > > >>connected, you should be able to press '#' on either phone to hear
> > > >>"transfer".  What I am experiencing is the calling GS adapter will
> > > >>hear "transfer" when they press '#', but when the receiving GS adapter
> > > >>presses '#', nothing happens at all.  Are you able to repeat this?  If
> > > >>not, can you please tell me the firmware revisions and Asterisk
> > > >>version that you are using?
> > > >>
> > > >>Thank you very much.
> > > >
> > > >
> > > > Yes, I am experiencing the same problem. Works fine with the
> > > > BudgetTone phones but not with the HandyTone-286.
> > > >
> > > > Have you resolved this yet? We've been trying to figure this out on
> > > > and off for the past couple of weeks.
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > > >
> > >
> > > --
> > >
> > > ---------
> > > Appradius Project: RADIUS authentication and accounting support for
> > > Asterisk PBX
> > > http://appradius.minitelecom.org/
> > > ---------
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>