[Asterisk-Users] Re: GS HandyTone-286 Transfer Problem, can anyone confirm?

[Lubomir Christov]

Yes, we are experiencing the same problem and because of that we 
switched the called HT ata to Cisco ATA 186 ...

Lubo

Andy Lee wrote:
> [ Message pasted from Sun, 7 Mar 2004 08:27:54 -0600 ]
> 
>>The problem I'm experiencing with many GS adapters, regardless of
>>firmware version is this.  Call from one phone to another phone using
>>both the 'T' and 't' flags in the Dial() command.  After they are
>>connected, you should be able to press '#' on either phone to hear
>>"transfer".  What I am experiencing is the calling GS adapter will
>>hear "transfer" when they press '#', but when the receiving GS adapter
>>presses '#', nothing happens at all.  Are you able to repeat this?  If
>>not, can you please tell me the firmware revisions and Asterisk
>>version that you are using?
>>
>>Thank you very much.
> 
> 
> Yes, I am experiencing the same problem. Works fine with the
> BudgetTone phones but not with the HandyTone-286.
> 
> Have you resolved this yet? We've been trying to figure this out on
> and off for the past couple of weeks.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 

-- 

---------
Appradius Project: RADIUS authentication and accounting support for 
Asterisk PBX
http://appradius.minitelecom.org/
---------