[Asterisk-Users] zaphfc problems...

Michael Sandee ms at zeelandnet.nl
Wed Aug 11 05:55:35 MST 2004


Although I don't think the error message would indicate something like 
this... but... are you sure you have a ptp isdn line (bri_cpe versus 
bri_cpe_ptmp).

Gary Pigott wrote:

> I think I'm going slightly mad.....
>
> I've got a Dell PowerEdge 400SC (Cel 2.4GHz, 256MB RAM, 40GB HDD) that 
> I'm using to set up a * PBX for a (very) small startup.
> It's running Debian Sarge with the stock 2.4.26 kernel (I know it's 
> still an "unstable" release, but  I'd need to jump through all sorts 
> of hoops to get Woody working properly). The plan is to use a BRI ISDN 
> for inbound, and fallback outbound, and IAX2 for the bulk of outbound 
> calls over ADSL (dialing _9X goes over IAX and _8X over ISDN. Nothing 
> more complicated than that). I'm using a generic HFC-S card from Billion.
>
> I'm using vanilla bri-stuff-0.1.0-RC2k from www.junghanns.net and 
> everything looks right. There are no errors or warnings during 
> startup. It seems to work correctly (well SIP and IAX2 anyway) until I 
> try to dial out over the ISDN line.
> I get the following:
> *CLI>     -- Executing Dial("SIP/602-9964", "Zap/g1/226581") in new stack
> Aug 11 11:51:08 NOTICE[245775]: app_dial.c:719 dial_exec: Unable to 
> create channel of type 'Zap'
>  == Everyone is busy/congested at this time
>
> There are channels there:
> *CLI> zap show channels
>   Chan Extension  Context         Language   MusicOnHold
> pseudo            default         en         default
>      1            default         en         default
>      2            default         en         default
>
> and the zaptel, zaphfc, isdn and hisax modules are loaded correctly in 
> the kernel.
>
> for anyone who's interested, the config files are at
> http://www.garypigott.net/files/asterisk/extensions.conf
> http://www.garypigott.net/files/asterisk/modules.conf
> http://www.garypigott.net/files/asterisk/zapata.conf
> http://www.garypigott.net/files/asterisk/zaptel.conf
>
> I've looked at the previous thread, started by Wim Venneman in 
> February, but it doesn't apply, because I can see channels in asterisk.
> Any help would be greatly appreciated.
>
> Regards,
>
> Gary
>
> Self-referencing
> Five, seven, five syllables
> This haiku contains
> http://garypigott.net
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



More information about the asterisk-users mailing list