[Asterisk-Users] Re: Invalid data ( 4 bytes at the end) message - from g729codec

[teyap at nextwavecomm.com.my]

Hi all,

I am currently running asterisk (CVS HEAD) on a p4 machine with rh7.3
and using nufone's h323 channel driver. 

I was using the old voiceage g729 and have replaced it with the digiums
g729. 

I used to have the message "Measured length exceeds frame length" but
since I changed the g729 codec I have not encountered this problem. However, 
another peculiar problem has cropped up which I did not have previously.

I get a continous message "codec_g729.c:196 g729tolin_framein: Invalid data (4 
bytes from the end)" 
when the first call is initiated and the sound quality is bad. However, 
subsequent calls after the first call
the voice quality is good since I don't get a stream of messages but 
intermittently. If I reload asterisk again and initiate a call , the above 
happens again.

Here's the scenario. 

planet fxs --> asterisk --> ata186

1st call --> continuous error message .. sound is bad (lots of echo) .. 
affects the voicemail too..
2st ..n calls -> no continous error message but intermittent .. sound is good

Has anybody encountered this problem before ? Any help or suggestions to solve 
this problem are kindly appreciated.

Thank you
TE Yap


-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/