[Asterisk-Users] Zaptel CVS HEAD 08-05-2004 problems

[Mike Coakley]

I tried using CVS HEAD 08-05-2004 for zaptel/asterisk last night but 
I'm having problems with zaptel. The last CVS HEAD I was using was CVS 
HEAD 07-31-2004. (BTW... I'm a CVS moron... what command would I use to 
get back to that version of HEAD because like an idiot I forgot to make 
a backup copy of the CVS HEAD on my system before I install from the 
new CVS HEAD. I tried cvs co -D 2004-07-31 -f zaptel but that didn't 
seem to work correctly.)

Anyway... my problem is that after modprobe removing and reinstalling 
the wcfxs module for my system after being built with CVS HEAD 
08-05-2004 I can receive 1 phone call on each of the FXO ports and then 
the FXO ports will not receiving any inbound phone calls. I can call 
out no problem all the time. If I restart (not reload) Asterisk I can 
get another single call through the FXO port again. It doesn't appear 
to be an Asterisk problem because I rebuilt zaptel from CVS HEAD 
07-21-2004 (the latest one I still had on my system) and don't have any 
problems.

Anyone have any ideas as to what might have happened? Also note I have 
other FXO port problems but I don't think that the other problems are 
related to this problem (that why I started a new post). Here is my 
zaptel.conf and zapata.conf.

ZAPTEL.CONF
#
# Zaptel Configuration File
#
fxsks=1-8
loadzone = us
defaultzone=us

ZAPATA.CONF
;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]
;
; All channel defaults
;
language=en
context=pstn_inbound
signalling=fxs_ks
musiconhold=default

relaxdtmf=no
echotraining=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=5.0
txgain=0.0
busydetect=no
busycount=6
callprogress=no

callgroup=1
pickupgroup=1

;We have this disabled for now since we don't have Caller ID on our 
lines
usecallerid=no
useincomingcalleridonzaptransfer=yes

;We group the following lines into a single group for
; pooled outbound calls
group=1

;Define our incoming/outgoing lines
callerid="MB Main - Line 1" <(973) 252-xxxx>
channel => 1
callerid="MB - Line 2" <(973) 252-xxxx>
channel => 2
callerid="MB - Line 3" <(973) 252-xxxx>
channel => 3
callerid="MB - Line 4" <(973) 252-xxxx>
channel => 4
callerid="MB - Line 5" <(973) 252-xxxx>
channel => 5
callerid="MB - Line 6" <(973) 252-xxxx>
context=pstn_fax_inbound
channel => 6

Thanks,

Mike