[Asterisk-Users] PRI protocol question...

[Scott Stingel]

Can you please say what problems you're having?
Does the board come up correctly and display a green LED?
Are there errors on the console

Etc...etc
 
Thanks

Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of John Harragin
Sent: Thursday, August 05, 2004 8:55 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] PRI protocol question...

I'm having difficulty getting a PRI working between asterisk and a Merlin
Legend. I have been attempting to get it going as esf, b8zs & 5ess (although
I have tried other switchtypes...).  I found the following info in the
Legend
docs:

If the switch type is 5ESS, the protocol MUST be set for ATT Custom.
If switch type is DMS-100, the protocol MUST be set for NTNAPRI

The README in libpri implies that switchtype=5ess is ATT Custom

from README:
...it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom
protocols on switches from Nortel and Lucent.
  
Is the protocol set to ATT Custom with the switchtype=5ess parameter? Are
the terms ATT Custom or NTNAPRI meaningfull to asterisk?

Thanks,

John
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users