[Asterisk-Users] ZyXEL 2000w In Call Menu/Hold configs

[John Howard]

Hi Everyone, 

After a fair amount of faffing ive managed to get the 2000w working with
asterisk for IP -> PSTN calls (i.e. get the phone to make and receive calls
over our BT line).  The final solution is to set up outgoing VoIP calls but
I now know that without a SIP aware router I can think again! (damn you
iptables!)

In the mean time I'm trying to figure out why I can't get the Zyxel to give
me the hold and transfer options on the screen, thus allowing me to pass
calls around once they are inside our network.  I'm expecting a few desk
phones to turn up in a few weeks, but zyxel are adamant that this thing
supports it, so does anyone know how to get it working?

I was led to believe that you would need the 't' at the end of the dial
string to enable the called party to transfer the call about, is this
correct?

My dial plan for the relevant contexts looks a little like this:

[ Context 'local-extensions' created by 'pbx_config' ]
  '0' =>        1. Goto(2000|1)                               [pbx_config]
  '2001' =>     1. Dial(SIP/2001|20|tr)                       [pbx_config]
                2. Voicemail(u2001)                           [pbx_config]
                102. Voicemail(b2001)                         [pbx_config]
                103. Hangup()                                 [pbx_config]
  '2002' =>     1. Dial(SIP/2002|20|tr)                       [pbx_config]
                2. Voicemail(u2001)                           [pbx_config]
                102. Voicemail(b2001)                         [pbx_config]
                103. Hangup()                                 [pbx_config]

[ Context 'always-out-pots' created by 'pbx_config' ]
 '_9XXXXXX.' => 1. Dial(Zap/1/WW${EXTEN:1}|tr)                [pbx_config]
                2. Goto(102)                                  [pbx_config]
                102. Congestion()                             [pbx_config]
                103. Hangup()                                 [pbx_config]

[ Context 'from-analog' created by 'pbx_config' ]
  'h' =>        1. Hangup()                                   [pbx_config]
  'i' =>        1. Hangup()                                   [pbx_config]
  's' =>        1. Dial(SIP/2001&SIP/2002|45|tr)              [pbx_config]
                2. VoiceMail(u2001)                           [pbx_config]
                3. Hangup()                                   [pbx_config]
                102. VoiceMail(b2001)                         [pbx_config]
                103. Hangup()                                 [pbx_config]

If anyone has any advice it would be appreciated

Regards,
jd

--
John Howard
Adelix Ltd
e: john.howard at adelix.com
tel: 0845 230 9590 / fax: 0845 230 9591 / support: 0845 230 9592
snail: The Old Post Office, Bristol Rd, Hambrook, Bristol, BS16 1RY
 
Any views expressed in this email communication are those of the individual
sender, except where the sender specifically states them to be the views of
a member of Adelix Ltd. Adelix Ltd. does not represent, warrant or guarantee
that the integrity of this communication has been maintained nor that the
communication is free of errors or interference.


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.730 / Virus Database: 485 - Release Date: 28/07/2004