[Asterisk-Users] Help with Quicknet PhoneJack@Asterisk

[Fritz Reichmann]

Hello,

I am planning to use my Quickent PhoneJack card with Asterisk. It appears to 
be the only way to use a Quicknet Card with SIP. Following some of the 
postings it should be possible. However I cannot get it to run.

I have installed the card successfully running Linux 2.6.6 with the native 
Linux driver using device /dev/phone0. Using gnomemeeting or ohphone I can 
place and receive H.323 calls fine, including a dialtone when I lift the 
analog phone.

I have installed asterisk-1.0-RC1 using a simple make; make install; make 
samples and changed

phone.conf:

mode=dialtone
format=g723.1
context=local
device => /dev/phone0

extensions.conf
CONSOLE=Phone/phone0

When I start asterisk and do a "show modules" I get:
chan_phone.so             Linux Telephony API Support              0

I believe the last number should be "1" ...

I am not yet familiar enough with asterisk to set it pu my own. Can somebody 
with more experience direct me on how to get the Quickent card running with 
asterisk ? After a while of googling and reading I do not really know what to 
do ...

Thank you,

Fritz