[Asterisk-Users] Outgoing DTMF on BRI

[Mark Elkins]

On Fri, 2004-04-30 at 09:08, Jason Penton wrote:
> Yes, you can do it with ISDN4linux.

Then I'm missing something....

modem.conf contains...
[interfaces]
context=remote
driver=i4l
language=en
type=autodetect
dialtype=tone
mode=immediate
group=1
msn=2929
device => /dev/ttyI0
device => /dev/ttyI1

extentions.conf contains...
[globals]
TRUNK=Modem/g1
TRUNKMSD=1

[def-out] ; My default method of placing an outgoing call
exten => _0.,1,Dial(${TRUNK}:${EXTEN:${TRUNKMSD}}) 
exten => _0.,2,Congestion


> -----Original Message-----
> If I want to send outgoing DTMF over a BRI interface, can I do it with
> 'isdn4linux' or must I use the 'capi' library?
-- 
  .  .     ___. .__      Posix Systems - Sth Africa
 /| /|       / /__       mje at posix.co.za  -  Mark J Elkins, Cisco CCIE
/ |/ |ARK \_/ /__ LKINS  Tel: +27 12 807 0590  Cell: +27 82 601 0496

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040430/72428289/attachment.pgp