[Asterisk-Users] Problems with ADIT600 and T100P

Ferrara, Jamie admin at telelaw.com
Thu Apr 22 18:15:23 MST 2004


Also, forgot to mention, ztcfg -v reports the following

 

 

Zaptel Configuration

======================

 

 

Channel map:

 

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

 

1 channels configured.

 

 

Thank you,

Jamie Ferrara

________________________________

From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Ferrara,
Jamie
Sent: Thursday, April 22, 2004 6:10 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Problems with ADIT600 and T100P

 

I am having trouble getting my T100P and ADIT 600 talking. I have 2 FXO
8 port cards in the ADIT and a T1 controller card. I have a T1 x-over
cable connecting two together. Here are copies of the relevant bits of
my zaptel.conf and Zapata.conf

 

Zaptel.conf

span=1,0,0,esf,b8zs

loadzone=us

defaultzone=us

 

Zapata.cfg

context=default

signalling=fxs_ks

group=1

channel => 1-24

 

My problem is that I keep getting a framing error on the ADIT or "LOF".
I have the ADIT set to ESF and B8ZS and it is also set to clock to the
T1. Can anyone give me a hand?

 

 

TIA,

Jamie Ferrara

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040422/f7aac86f/attachment.htm


More information about the asterisk-users mailing list